Guest guest Posted January 17, 2008 Report Share Posted January 17, 2008 Go To: www.healingtheeye.com/microcurrent.htm ; lists Second Opinion Newsletter as a source x 2, others. Summary: Various tissues have a specific frequency of healing. Those mentioned are RETINA --> 95 Hz; MACULA --> 137 Hz; Hemorrhage -- > 18 Hz, EDEMA --> 14 Hz; includes a statement that every specific tissue has it's own most sensitive frequency. I was astounded to see that they fall in the low end of the Rife range [below 999 Hz]. Currents needed are 10 to 500 microamps which cause up to times 5 increase in ATP production, 70% rise in protein synthesis, 40% increase in 'cell transport'. The article that caught my attention stated they use a small probe [metal] outboard of each eye to provide the current path. My best guess is that an oscillator using ordinary chips can easily be built at a parts cost of about $30 which is capable of the power and stability needed, use ordinary 1 square inch pads outboard of each eye for current insertion. You could mix frequencies - two ways - either the ones of interest for a few seconds, alternating with the next, next, ... or; since body tissues have the ability to mix frequencies [are a non-linear material - can internally generate the needed intermediate frequency when 2 are supplied at the same time; same as happens in your radio receivers. Ex. Local oscillator is set to 455 KHz different from the incoming station. Here, 95 - 137 has a difference frequency of 42 Hz] Nothing was stated about what corresponds to 42 Hz but there is a quoted reference for more detail. The basic use can be to provide the 2 frequencies on the same wire at the same time [adding] which would result in the difference frequency of 42 Hz and the sum frequency of 232 Hz mixed, all 4 frequencies present in the tissue; passing through your skull, eyes, diffusing into sinuses, etc.. THIS CONCEPT MERGES RIFE INTERFACES WITH WHAT WE ALREADY USE. Instrumentation needed: 1. Oscilloscope [good to 2% typically], 2. calibrated frequency source - software and a full duplex sound card for your computer, S / W is already public use at several Rife sites. Note: Use of surface mount technology and micropower op - amps will result in a card having about 2.5 sq inches area, 1 quad op - amp, all 4 sections used; 2 for the primary frequencies, another for automatic timed frequency selection, the last to sum the 2 signals to put alternating frequencies on the same wire, leaves another square inch for LED continuity monitoring, set resistances for current control, about 10 mA idle current, no power amplifier needed, AAA cell life about a month continuous operation; POCKET PORTABLE; NON-INVASIVE. Looks like it can be made idiot resistant so ordinary experimenters can handle it in the same manner as fixing sinuses. Have had a chat with several at the Sr. Citizen's Center here, believe there is a crying need for an alternative to your M.Dieties' claim that " I don't know how to fix it; THEREFORE IT CAN'T BE FIXED. Too bad you can't drive any more & don't read well. " Better yet - catch it before it gets that bad. Later; Joe. BTW - lead time would be about a month if I were to make a couple available for evaluation. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.