What systemic infections do you have?

[Guest guest]

I'm gonna a build a device to pass current through whole body while

asleep. This is aimed mainly at making the whole body inhospitable

to virus and bacteria. It may or may not remove it all. But the

idea is to give everything a dosing of some level, everywhere, and

for a consistent lengthy application time, thus interrupting a lot of

the replication cycle.

The scheme involves using aluminized bubble wrap similar to car

sunshield material or home insulation rolls. IT comes in 1/4 " thick

3 foot by 3 yard rolls for a few bucks at home depot, lowe's etc.

The material will be cut in two squares of about 30 inches each.

These will be safety pinned to the lower bed sheet allowing a space

of about 12 inches between them. One at the foot the other at the

head of the bed, so that the body reclines touching both except in

the mid-section. There, the bedsheets will be in contact with the

mid-body. Alligator clips will attach wires to corner of each

square. The current will easily cover the whole sheet and provide

the body with a large total current but dispersed over the whole, so

that no skin irritation should occur.

The power source should be started out at 1.2-1.5 volts. This can be

a simple AA or AAA battery of either rechargeable (1.2 volts) or

alkaline (1.5 volts). No more at first. If all goes well, next

night a second battery can be added to raise it to 2.4-3.0 volts.

Beware of more. We want the lowest power that yet produces a

desirable effect.

This would be a first try at whole-body applied. I think the idea

deserves a try. I want to know what systemic (large scale)

infections are group members suffering from at this time.

eg: HIV, Hep-c, lyme's, malaria, what else? CFS might be one to try

but we don't know if it is microbial in origin.

bG

[Guest guest]

what about dental foci?

energy blocks?

roger

baby_grand <no_reply > wrote:

I'm gonna a build a device to pass current through whole body while

asleep. This is aimed mainly at making the whole body inhospitable

to virus and bacteria. It may or may not remove it all. But the

idea is to give everything a dosing of some level, everywhere, and

for a consistent lengthy application time, thus interrupting a lot of

the replication cycle.

The scheme involves using aluminized bubble wrap similar to car

sunshield material or home insulation rolls. IT comes in 1/4 " thick

3 foot by 3 yard rolls for a few bucks at home depot, lowe's etc.

The material will be cut in two squares of about 30 inches each.

These will be safety pinned to the lower bed sheet allowing a space

of about 12 inches between them. One at the foot the other at the

head of the bed, so that the body reclines touching both except in

the mid-section. There, the bedsheets will be in contact with the

mid-body. Alligator clips will attach wires to corner of each

square. The current will easily cover the whole sheet and provide

the body with a large total current but dispersed over the whole, so

that no skin irritation should occur.

The power source should be started out at 1.2-1.5 volts. This can be

a simple AA or AAA battery of either rechargeable (1.2 volts) or

alkaline (1.5 volts). No more at first. If all goes well, next

night a second battery can be added to raise it to 2.4-3.0 volts.

Beware of more. We want the lowest power that yet produces a

desirable effect.

This would be a first try at whole-body applied. I think the idea

deserves a try. I want to know what systemic (large scale)

infections are group members suffering from at this time.

eg: HIV, Hep-c, lyme's, malaria, what else? CFS might be one to try

but we don't know if it is microbial in origin.

bG

---------------------------------

Never miss a thing. Make your homepage.

[Guest guest]

nope.

> I'm gonna a build a device to pass current through whole

body while

> asleep. This is aimed mainly at making the whole body inhospitable

> to virus and bacteria. It may or may not remove it all. But the

> idea is to give everything a dosing of some level, everywhere, and

> for a consistent lengthy application time, thus interrupting a lot

of

> the replication cycle.

>

> The scheme involves using aluminized bubble wrap similar to car

> sunshield material or home insulation rolls. IT comes in 1/4 " thick

> 3 foot by 3 yard rolls for a few bucks at home depot, lowe's etc.

>

> The material will be cut in two squares of about 30 inches each.

> These will be safety pinned to the lower bed sheet allowing a space

> of about 12 inches between them. One at the foot the other at the

> head of the bed, so that the body reclines touching both except in

> the mid-section. There, the bedsheets will be in contact with the

> mid-body. Alligator clips will attach wires to corner of each

> square. The current will easily cover the whole sheet and provide

> the body with a large total current but dispersed over the whole,

so

> that no skin irritation should occur.

>

> The power source should be started out at 1.2-1.5 volts. This can

be

> a simple AA or AAA battery of either rechargeable (1.2 volts) or

> alkaline (1.5 volts). No more at first. If all goes well, next

> night a second battery can be added to raise it to 2.4-3.0 volts.

> Beware of more. We want the lowest power that yet produces a

> desirable effect.

>

> This would be a first try at whole-body applied. I think the idea

> deserves a try. I want to know what systemic (large scale)

> infections are group members suffering from at this time.

>

> eg: HIV, Hep-c, lyme's, malaria, what else? CFS might be one to try

> but we don't know if it is microbial in origin.

>

> bG

>

>

>

>

>

>

>

> ---------------------------------

> Never miss a thing. Make your homepage.

>

>