Guest guest Posted April 5, 2011 Report Share Posted April 5, 2011 "A standard single gang pot is shown in Figure 5. The important external bits are shown so you can refer to them as needed. I have (somewhat arbitrarily) numbered the terminals as 1, 2 and 3. Terminal 2 is the wiper. For a "standard" volume control application, 1 is normally connected to ground, the input is applied to 3, and the output taken from 2 (wiper) allowing the output to be varied from ground (no signal) to input (maximum signal)."See all about pots at: http://sound.westhost.com/pots.htm Quote Link to comment Share on other sites More sharing options...
Guest guest Posted April 10, 2011 Report Share Posted April 10, 2011 Well, bG, One needs only to click on "Rich-Text Editor" if posting or replying at the group site. Then Click copy an image from the internet and paste or drag and drop.SEE!! It's easyOnly thing is that this was a fresh battery when I started! Ron> >> > [Figure 5] "A standard single gang pot is shown in Figure 5. The> > important external bits are shown so you can refer to them as needed. I> > have (somewhat arbitrarily) numbered the terminals as 1, 2 and 3.> > Terminal 2 is the wiper. For a "standard" volume control application, 1> > is normally connected to ground, the input is applied to 3, and the> > output taken from 2 (wiper) allowing the output to be varied from ground> > (no signal) to input (maximum signal)."> > See all about pots at: http://sound.westhost.com/pots.htm> > <http://sound.westhost.com/pots.htm>> >> Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.