Re: Re: RF Meter Question?

[Guest guest]

Yes I'm not really sure if I need one that is ultra sensitive but I sure know

that I am!  Loni

 

From: emraware <emraware@...>

Subject: Re: RF Meter Question?

Date: Thursday, September 15, 2011, 8:06 PM

 

If it's primarily for personal detection & safety, I've found the Cornet to be

very helpful-- and it's probably a lot cheaper. I saw Cornet meter on a video in

stopsmartmeters.org, so apparently it can be used for smart meters as well.

However, as it's providing one number for a wide range of frequencies, I'm not

sure how exactly it compares with official standards, so a more expensive meter

might be good if you need a meter for more reasons than personal safety alone.

>

>

>

>

>

>

>

>

>

>

>  

> Please Advise!

> I am looking at these two meters? Is there any reason I might need the second

one which is $500 or would the $200 be sufficient for cell radiation and basic

troubleshooting?

>  

> Loni

>  

>  

>  

> The EMF Safety Superstore

> Radiofrequency Meters

> Best selection, great prices on Meters, Sensors, Alarms and Detectors for

Microwave and RF Radiation

> Including Spectrum Analyzers, Cell Phone Detectors, Frequency Counters, Test

Equipment

> RF METERS

> FOR DIGITAL & ANALOG SIGNALS

>  

> 3-Axis RF Meter

> Perfect Low Cost Digital RF Meter

> Breakthrough in low cost RF measurement. Covers 50 MHz to 3.5 GHz and great

for digital and analog RF signals. Use in 3-axis (isotropic) measurement mode or

check each of the X,Y Z axis! Includes audio alarm with adjustable threshold and

200 point manual memory function. Extremely sensitive: 38 mV/m to 11 V/m

(equivalent to .38 nanoWatt/cm² to 30 microWatt/cm²). 4-digit LCD display

offers mV/m, A/m, W/cm², or W/m². Display resolution: 0.1mV/m, 0.1µA/m,

0.001µW/m², 0.001µW/cm². Updates 2.5 times per second. Choose to

display instantaneous value, maximum value, or average. ±2.4dB accuracy or

better. Great for cell tower and wi-fi measurements. Uses 9V battery. 1 yr

factory warranty.

> Quick Start Instructions for 3-Axis RF Meter (pdf)

> 3-Axis RF Meter (Cat. #A495) ......... $199.95 

>  

>

>  VIEW SHOPPING CART

> OR CHECK-OUT

> ORDERS: 8 8 8 - 5 3 7 - 7 3 6 3

> Outside USA: +1 - 5 1 8 - 4 3 2- 1 5 5 0

>  

>

>  

> 8 GHZ RF METER

> Very Wide Frequency Range

> Need to measure the new 5.8 GHz phones, baby monitors, DECT phones, wireless

routers, surveillance bugs or other frequencies up to 8 GHz?

> This breakthrough in higher frequency RF measurement covers 10 MHz to 8 GHz

and great for digital and analog RF signals. 3-axis (isotropic) measurement.

Includes audio alarm with adjustable threshold and 99 point manual memory

function. Extremely sensitive: 20 mV/m to 108 V/m (equivalent to 0.1

nanoWatt/cm² to 3 milliWatt/cm²). 4-digit LCD display offers V/m, A/m,

W/m², or µW/cm². Choose to display instantaneous value, maximum value,

or average. ±1dB accuracy or better. Uses 9V battery. 1 year factory

warranty.

> 8 GHz RF Meter (Cat. #A489) ……… $499.00 

>  

>

>  

>

>

>