Guest guest Posted September 15, 2011 Report Share Posted September 15, 2011  Please Advise! I am looking at these two meters? Is there any reason I might need the second one which is $500 or would the $200 be sufficient for cell radiation and basic troubleshooting?  Loni    The EMF Safety Superstore Radiofrequency Meters Best selection, great prices on Meters, Sensors, Alarms and Detectors for Microwave and RF Radiation Including Spectrum Analyzers, Cell Phone Detectors, Frequency Counters, Test Equipment RF METERS FOR DIGITAL & ANALOG SIGNALS  3-Axis RF Meter Perfect Low Cost Digital RF Meter Breakthrough in low cost RF measurement. Covers 50 MHz to 3.5 GHz and great for digital and analog RF signals. Use in 3-axis (isotropic) measurement mode or check each of the X,Y Z axis! Includes audio alarm with adjustable threshold and 200 point manual memory function. Extremely sensitive: 38 mV/m to 11 V/m (equivalent to .38 nanoWatt/cm² to 30 microWatt/cm²). 4-digit LCD display offers mV/m, A/m, W/cm², or W/m². Display resolution: 0.1mV/m, 0.1µA/m, 0.001µW/m², 0.001µW/cm². Updates 2.5 times per second. Choose to display instantaneous value, maximum value, or average. ±2.4dB accuracy or better. Great for cell tower and wi-fi measurements. Uses 9V battery. 1 yr factory warranty. Quick Start Instructions for 3-Axis RF Meter (pdf) 3-Axis RF Meter (Cat. #A495) ......... $199.95   VIEW SHOPPING CART OR CHECK-OUT ORDERS: 8 8 8 - 5 3 7 - 7 3 6 3 Outside USA: +1 - 5 1 8 - 4 3 2- 1 5 5 0   8 GHZ RF METER Very Wide Frequency Range Need to measure the new 5.8 GHz phones, baby monitors, DECT phones, wireless routers, surveillance bugs or other frequencies up to 8 GHz? This breakthrough in higher frequency RF measurement covers 10 MHz to 8 GHz and great for digital and analog RF signals. 3-axis (isotropic) measurement. Includes audio alarm with adjustable threshold and 99 point manual memory function. Extremely sensitive: 20 mV/m to 108 V/m (equivalent to 0.1 nanoWatt/cm² to 3 milliWatt/cm²). 4-digit LCD display offers V/m, A/m, W/m², or µW/cm². Choose to display instantaneous value, maximum value, or average. ±1dB accuracy or better. Uses 9V battery. 1 year factory warranty. 8 GHz RF Meter (Cat. #A489) ……… $499.00   Quote Link to comment Share on other sites More sharing options...
Guest guest Posted September 15, 2011 Report Share Posted September 15, 2011 If it's primarily for personal detection & safety, I've found the Cornet to be very helpful-- and it's probably a lot cheaper. I saw Cornet meter on a video in stopsmartmeters.org, so apparently it can be used for smart meters as well. However, as it's providing one number for a wide range of frequencies, I'm not sure how exactly it compares with official standards, so a more expensive meter might be good if you need a meter for more reasons than personal safety alone. > > > > > > > > > > >  > Please Advise! > I am looking at these two meters? Is there any reason I might need the second one which is $500 or would the $200 be sufficient for cell radiation and basic troubleshooting? >  > Loni >  >  >  > The EMF Safety Superstore > Radiofrequency Meters > Best selection, great prices on Meters, Sensors, Alarms and Detectors for Microwave and RF Radiation > Including Spectrum Analyzers, Cell Phone Detectors, Frequency Counters, Test Equipment > RF METERS > FOR DIGITAL & ANALOG SIGNALS >  > 3-Axis RF Meter > Perfect Low Cost Digital RF Meter > Breakthrough in low cost RF measurement. Covers 50 MHz to 3.5 GHz and great for digital and analog RF signals. Use in 3-axis (isotropic) measurement mode or check each of the X,Y Z axis! Includes audio alarm with adjustable threshold and 200 point manual memory function. Extremely sensitive: 38 mV/m to 11 V/m (equivalent to .38 nanoWatt/cm² to 30 microWatt/cm²). 4-digit LCD display offers mV/m, A/m, W/cm², or W/m². Display resolution: 0.1mV/m, 0.1µA/m, 0.001µW/m², 0.001µW/cm². Updates 2.5 times per second. Choose to display instantaneous value, maximum value, or average. ±2.4dB accuracy or better. Great for cell tower and wi-fi measurements. Uses 9V battery. 1 yr factory warranty. > Quick Start Instructions for 3-Axis RF Meter (pdf) > 3-Axis RF Meter (Cat. #A495) ......... $199.95 >  > >  VIEW SHOPPING CART > OR CHECK-OUT > ORDERS: 8 8 8 - 5 3 7 - 7 3 6 3 > Outside USA: +1 - 5 1 8 - 4 3 2- 1 5 5 0 >  > >  > 8 GHZ RF METER > Very Wide Frequency Range > Need to measure the new 5.8 GHz phones, baby monitors, DECT phones, wireless routers, surveillance bugs or other frequencies up to 8 GHz? > This breakthrough in higher frequency RF measurement covers 10 MHz to 8 GHz and great for digital and analog RF signals. 3-axis (isotropic) measurement. Includes audio alarm with adjustable threshold and 99 point manual memory function. Extremely sensitive: 20 mV/m to 108 V/m (equivalent to 0.1 nanoWatt/cm² to 3 milliWatt/cm²). 4-digit LCD display offers V/m, A/m, W/m², or µW/cm². Choose to display instantaneous value, maximum value, or average. ±1dB accuracy or better. Uses 9V battery. 1 year factory warranty. > 8 GHz RF Meter (Cat. #A489) ……… $499.00 >  > >  > > > Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.