Re: Re: tesing the scio and harness

[Guest guest]

Ok so get your self some Spectra 360 Electrode gel form any medical suply store. Put it on the electros. start the SCIO program and you will get a pic of the SCIO with a Diagnostics (uper left corrner) buttom click it and then click Patient Electrode check the numbers should be above 100 with the gel on Cheers z_fixitman <z_fixitman@...> wrote: Make sure the skin is moist enought for conductiveity. Have you evercleaned the

harnesses with any solvents? You should be able to testthe continuity in the harnesses with an Ohm meter. Thank you ,http://timholmes.byregion.net >> can anyone tell me how to test the harness and the scio to make sure> they are both working correctly.> every time i go to calibration i get a red box come up saying "the> qxci-e and your patient or another device is detected the calibration> can continue make sure the patient is properly connected to the> device correctly. with two buttons 1 to close and 1 say qxci box> active which when pressed always gives me "caution there is very> little energy detected, are you sure the patient is properly hooked up> or the calibration will compensate" ok. in the

calibration graphicon> box i get nothing and when i go to biofeed back and test reactivity> and evoked response testing i get very disturbing clicking sound and a> very high yellow bar and the other colours/items don't seem to respond.>* Okanagan Optimum Health Center * "Getting to the Heart of Health not the Hype of Health" http://www.greatlifeintl.com/clark Providing EPFX/SCIO Biofeedback therapies to the World “Helping People ACHIVE full Potential” OkanaganOHC@... Inquires, sales, support and therapies For details:

250-499-6581

Ask a question on any topic and get answers from real people. Go to Answers.

[Guest guest]

Hello Everyone,

Yes below is the right information for the harness test

I am really surprised that many people operating the SCIO do not know about this test.

It can be performed when ever you suspect that the harness is not working properly.

Tip: if you hook up the patient at the start of the session, by the time that you do the SOC and get on to calibration, it will have had time to make a good connection with the skin.

PS. well done the person that wrote the email below.

Regards

Branco

From: fullpana88

Sent: Thursday, April 03, 2008 7:28 PM

qxci-english

Subject: Re: tesing the scio and harness

Hello, testing the harness is done at the very beginning of the program. Assuming you have the QXCI and not the LIFE system since im not familiar with that one.If the device is ON and connected to the computer you will first get a screen with a picture indicatig where each color harness must be attached to the patient. On the upper left side of that little screen you click on a Diagnostic icon to perform a diagnostics on the device (make sure now that it is attached to the client/patient) It will ask you if you want to test the device, click yes. Now click on the upper right where it now says electrode check, and you can do the rest by yourself. But afte this you must restart both the program and the device. If the patient isn't hooked up properly the Electrode check you did will let you know.Let me know if this helped.