Jump to content
RemedySpot.com

Zappers

Rate this topic


Guest guest

Recommended Posts

List:

This was posted on Keelynet. Wide range of zapper information and links to

plans if you want to build your own.

Dotsie

After our conversation today, I pulled out the facts based on the

majority of machines and s own recommendations.

The Zapper I have measures;

Battery 8.98 vdc

Output 1.7vdc

Freq 29.3khz

and should be an absolute minimum output of 4.5 but ideally 10-15

treatment duration protocols recommended by are three 7 minute

sessions as below

URLs for several circuits are included below as well as a wide range of

information showing what the majority of zappers provide.

---------------------

http://www.adcomtronics.com/zapper.htm

What about zapper output frequency? In our experimental testing, 2.5 kHz

(2500 pulses per second) works significantly better than the 30 kHz

suggested in Dr. 's book. Due to the " skin effect, " it can be

expected to penetrate more deeply.

---------------------

schematic using a 555;

http://www.zapperlab.com/

Turn zapper on, zapping for 7 minutes.

At end of 7 minute zapping rest 20 minutes.

Do this a minimum of three 7 minute zapping sessions, with a 20 minute

break in between each session. Some people zap five times in extreme

cases.

---------------------

$10 zapper using a 4069 hex inverter;

http://freeman.freeshell.org/zapperplans/plans.html

" ... Any positively offset [DC] frequency kills all bacteria, viruses

and parasites simultaneously given sufficient voltage (5 to 10 volts),

duration (seven minutes), and frequency (anything from 10 Hz to 500'000

Hz). " (Taken from The Dr. Research Association website.)

Subsequent testing showed it was not due to some unique design, or

special wave form produced by the device. It was due to battery

operation! Any positively offset [DC] frequency kills all bacteria,

viruses and parasites simultaneously given sufficient voltage (5 to 10

volts), duration (seven minutes), and frequency (anything from 10 Hz to

500'000 Hz).

But it takes more than one treatment. It takes three treatments to kill

everything. Why? The first zapping kills viruses, bacteria and

parasites. But a few minutes later, bacteria and viruses (different

ones) often recur. I conclude they had been infecting the parasites, and

killing the parasites released them. The second zapping kills the

released viruses and bacteria, but soon a few viruses appear again. They

must have been infecting some of the last bacteria. After a third

zapping I never find any viruses, bacteria or parasites, even hours

later. (From: " The Cure for All Diseases " , p. 13ff.; copyright notice)

---------------------

http://zap.intergate.ca/zapper.html

After working for 10 months experimenting with various prototypes, I

developed the Third Generation Zapper. I call it The Ultimate Zapper.

The original Hulda Zapper has a bottom side to the square-wave as

well as a positive side. The positive pulsations are the " good "

pulsations. I do not produce the original Hulda model anymore. In

The Ultimate Zapper I have eliminated the bottom side of the wave

completely. The wave spikes down to the zero line then spikes back up to

form the next square wave. All the pulsations are positive.

Also, I have eliminated the 9-volt battery power source. Battery

discharge produces a number of problems and potential problems. First of

all, without adequate voltage the therapeutic value of the device may be

greatly diminished. The 9-volt battery discharges very quickly, even

with a CMOS timer chip that extends battery life. You may think that you

are zapping yourself, after all the light goes on, but the juice is not

delivering any punch. So The Ultimate Zapper is powered by an AC adapter

that delivers in the range of 13 to 15 volts EVERY TIME YOU ZAP. Since

there is no battery to discharge there is no loss of therapeutic power.

(Battery power is optional with the unit, for those on the road or away

from a wall plug temporarily.)

In addition, the AC power ensures a constant and pure wave form. With a

discharging battery, the square wave can develop " echoes " that can

affect the therapeutic value of the wave. AC power ensures you will

always have a pure and constant square wave with no possibility of

echoes .The Ultimate Zapper has as frequency of about 2,000 Hertz versus

the 30,000 Hertz of the original Hulda Zapper. Each pulsation

produced by The Ultimate Zapper is 15 times longer than the earlier

Zapper. If you think of each pulsation as an arrow, if that arrow is 15

times longer it can penetrate deeper to kill parasites, bacteria and

viruses.

---------------------

http://www.toolsforhealing.com/products/Zapper.htm

Each Zapper is a professionally designed quality unit, thoroughly tested

on an oscilloscope, and is guaranteed to operate per the specifications.

The Zapper has an output frequency of about 30,000 Hertz (cycles per

second Positive-Offset), at a nominal voltage of 9 VOLTS DC.

Added Features

Extended battery life. (A typical 9 Volt Alkaline battery will last a

very long time.)

Low battery warning. When the output drops to below the recommended

level, a Red LED light will illuminate, indicating the need for a fresh

battery.

Our Electrical Circuit Boards are GOLD Plated for extreme reliability

and workmanship.

Uses Conductive (Anti-Static) Wrist Straps instead of Copper Pipes.

3 Year Parts and Labor Warranty on all internally mounted components.

---------------------

schematic recommended by her son;

http://www.toolsforhealing.com/images/Zapper_zhc3_schematic.gif

---------------------

Hulda s site recommends THIS as the version she authorizes as

correct;

http://www.clarkzapper.com/

Timer Zapper

This zapper has an internal timer that goes through a complete 3 session

zapping automatically. Put on the Velcro wrist cuffs, turn it on and it

zaps for 3 seven-minute sessions with a 21 minute break in between. Easy

to use.

---------------------

with wristbands;

http://www.braintuner.com/zapper.htm

Frequency - 30.081 kHz. (30,081 cycles per second)

Input Voltage: 9 Volts DC (Alkaline Battery)

Peak-to-peak output voltage - 11.2 Volts

Output Voltage - ~9 Volts Peak Voltage

Squarewave, 50% Duty Cycle, positive Offset

----------------------

http://www.braintuner.com/superzap.htm

* Short rise time square wave for harmonic frequencies

* Straight leads for better efficiency

* Voltage adjustment spin wheel up to max. 15 volts

* On/off time of slightly different length creates more harmonic

frequencies

----------------------

http://www.curecancer.com/Products/Quality_of_Living/Zapper/zapper.html

The zapper's circuitry is built around a 555 timer integrated circuit

which emits a nice, positive offset square wave of direct current

(stepped down to around 4.5volts and 3.5milliamps)at a frequency of

about 20,000 times per second. " Positive offset " is a wave form that has

alternating current characteristics. This may be important in the long

run because it won't alter the body's natural electromagnetic field

polarity.

----------------------

http://www.sota-inc.com/zapper/

Specifications:

Input Voltage: 9 Volts DC (Alkaline Battery)

Output Voltage: ~30,000 Hertz (cycles per second), Square wave, 50% Duty

Cycle, Positive Offset, at ~9 Volts Peak Voltage. To see the actual

output waveform from the oscilloscope, please click HERE. Note the

extremely square and symmetrical waveform; free of any spikes or

artifacts. The frequency as measured in this unit is 30.081 kHz (30,081

cycles per second), and the peak-to-peak output voltage is measured at

11.2 Volts. This conforms to specifications exactly.

----------------------

http://www.telepath.com/morganpk/zapper.index.html

SPECIFICATIONS of the ZAPPER model ZPR-2B:

This Zapper is made to the specificationsdescribed in the book " The Cure

For All Diseases " by Dr. Hulda . The Zapper produces a 33khz

squarewave, positive offset, 8 volts peak to peak.

----------------------

http://www.google.com/search?q=cache:ArKmk-YR4MkC:www.lm77.f2s.com/zapperplans

/faq.html+hulda+clark+zapper & hl=en

A " Zapper " is a very simple electrical device that just turns the

electrical flow of a 9-volt battery off and on at regular intervals.

Also called a " Parasite Zapper " , it's name stems from a statement made

by Dr. Hulda in her book " The Cure For All Diseases " that any

9-volt positive-offset pulsed current can kill all the parasites in the

human body in 7 minutes. To quote from her website,

.... Any positively offset [DC] frequency kills all bacteria, viruses and

parasites simultaneously given sufficient voltage (5 to 10 volts),

duration (seven minutes), and frequency (anything from 10 Hz to 500'000

Hz). (source)

What's the difference between yours and the one in the book?

Most sites that try to sell you one for $50+ will say that it's the

" original design " designed by Hulda's son, Geoffrey. This simply shows

how little they know about electronics. A multivibrator like my free

electronic circuit schematic can be built for only a few dollars in

parts and (with practice) a few minutes in labor and is much simpler,

less expensive, and more energy efficient than the original

version. The bottom line is that the battery lasts longer (about three

times as long) in ours and costs way less.

----------------------

555 circuit;

http://members.aol.com/_ht_a/mas1911/myhomepage/

When testing my body on a spectrum analyzer while using the Simple

Zapper with an output of around 5 Volts (tested on a DC voltmeter), I

noticed that the frequencies around 4,000 hz to around 18,000 hz had

larger peaks telling me that my body at the time was more conductive

(less reactive?) and/or less resistive to frequencies in this range at

the given voltage. With my body being more conductive (less reactive?)

at these frequencies, I believe that there is a better dispersal of the

Simple Zapper's output within my body. I did this recent test with one

Zapper probe in each hand (as opposed to both in one hand) and the

oscilloscope probes (RCA to 1/4 " phone plug adaptor) in my mouth near my

wisdom teeth with my lips around the RCA ground (like a lollipop). The

oscilloscope's frequency analyzer was in storage mode. With the Simple

Zapper circuit on this page, change the 2.2k ohm resistor to 4.3k ohm if

you want a ~15,000 hz frequency. I have recently built a couple of

Zappers with optimized output frequencies of around 11,000 hz. I haven't

tested anyone using the Simple Zapper other than myself, so there is the

possibility that your body's response may differ.

----------------------

sweeping frequency zapper;

http://www.comsci.eurobell.co.uk/aczp1sf.html

This product contains a special computer chip programmed by Commercial

Science to carry out the functions of this fully automated s

Zapper. The normal s Zapper has a single frequency of 32kHz, the

sweeping frequency Zapper sweeps its frequency continually between 10kHz

and 100Khz during its Zapping cycle.

3. Three warning beeps to tell you pick up the electrodes. The yellow

lamp comes on continually while you Zap for 7 mins.

----------------------

http://www.google.com/search?q=cache:t1qVEiPBrGAC:hometown.aol.com/mas1911/+hu

lda+clark+zapper & hl=en

This circuit contains only the necessary components (one I.C. chip, two

resistors, two capacitors and one diode) to produce a >5-volt,

approximately 30,000 hz square wave as per Hulda 's books. Change

the 2.2k resistor to 27k if you want a ~2,400 hz square wave. Put a 1M

pot in series with the 2.2k resistor, if you want a variable output

frequency. The Simple Zapper that I'm using has a 1 Meg potentiometer

instead of the 2.2k resistor in order to vary the output frequency.

With the oscilloscope's frequency analyzer in storage mode, I hold the

Zapper probes and put the oscilloscope probes somewhere on my body and

then I vary the frequency of the Zapper using the 1 Meg potentiometer.

While using the Zapper at 7.5V, I noticed that the frequencies around

15,000 hz had larger peaks telling me that my body at the time was more

conductive and/or less resistive to frequencies in this range at the

given voltage.

----------------------

anecdotes;

http://www.wave.net/upg/zapper/pararep.htm

The zapper's circuitry is built around a 555 timer integrated circuit

which emits a

nice, positive offset square wave of direct current from a nine-volt

battery (stepped down to around 4.5volts and 3.5milliamps)at a

frequency of about 20,000 times per second. " Positive offset " is a

wave form that has alternating current characteristics. This may be

important in the long run because it won't alter the body's natural

electromagnetic field polarity.

----------------------

http://shell.amigo.net/~stenulson/althealth/zappers.htm

The HFA model covered only the Hulda frequency range, starting at

about 62,000 Hz (62KHz) and going up to over 1 MHz. The HFA-4 models,

with their greater frequency range capabilities and additional control

and power options, can do everything that the HFA could do, and more.

For that reason, I discontinued offering the Zapper HFA .

The 'AV' on the newer HFA-4 models refers to the updated feature of the

use of an ADJUSTABLE VOLTAGE on the output to regulate the amount of

power; using the 'wall wart' transformer, the output can be set from

about 5 volts up to about 14 volts, allowing experimentation with higher

power zapping, while using reducing voltage instead of adding resistance

to limit output current drive... results of this approach may give a

more 'effective' signal being induced into the body... more on this

later.

----------------------

http://www.top-biz.com/odessamidlandcancer/zappers.htm

Based on the books of Hulda , Ph.D., N.D.

The Tri Zap is a small battery operated electrical device that sends an

electrical impulse through the body at a frequency of approximately 33

kilohertz, 94 kilohertz and 137 kilohertz at 5 to 9 volts.

----------------------

http://www.oxyrife.com/RifeComparisons.htm

WHAT IS THE DIFFERENCE BETWEEN A BOB BECK DEVICE AND THE HULDA CLARK

ZAPPER?

A rife machine relies on frequency, a Bob Beck device relies on

voltage/amperage and a Hulda zapper relies on polarity. Only a

true rife machine can affect the entire body at once, but you must have

the right frequency. With the other two units, you can effect many

different lifeforms at once, but they cannot reach the entire body.

----------------------

problems with zapper;

http://www.ioa.com/~dragonfly/clarkzapper.html

http://www.familyinternet.com/quackwatch/01QuackeryRelatedTopics/Cancer/clark.

html

http://www.healthwatcher.net/Quackerywatch/Hulda_/ht991004woman-charged.h

tml

--

Jerry W. Decker - http://www.keelynet.com

from an Art to a Science - order out of Chaos

discussion list - http://www.escribe.com/science/keelynet

Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...