Guest guest Posted March 18, 2002 Report Share Posted March 18, 2002 I have tried to send this message a few times and keep messing up so hopefully all of you havent had to read this multple times Thank you to all of you that responded and helped me out. Special thanks to and who gave me lots of info about Children's Hospital and the Nopco located there. We decided to go to Children's hosptial and get a 2nd opinion on March 29th with Dr, Proctor. We will then use the Nopco there and will try and get Mike that highly recomends We feel better that Reid will be seeing a Pediatric Neursurgeon vs the one that see's adults like we saw the other day. We just want to get this underway so Reid can get better. thank you for offering to get together over Easter weekend for coffee. Unfortunatley out families live in NH and we wil be there all weekend. West Springfield is over an hour away from Wilmington (maybe more???) I am near Woburn/ Burlington - are you familar with the area? Maybe we can make it happen another time. Thank you again to all and you will be hearing from us again once Reid gets his helmut/band. ~ Sue - Reid's mom > Hi Sue, > > I am so surprised, these are not the experiences we had at all, but then > again we knew nothing about plagio until we were sent into Nopco for the > casting. It was after the casting that I found this website and began > researching the different types of helmets. We did not see any pictures of > helmets, but they had some made up there that we were able to see and hold. > I have seen about 6 other babies there in helmets, all with the open on > top/no chin strap style. In addition to the open top, ours has holes all > around the back and sides for ventilation. The Nopco we go to is in > Children's Hospital, on Longwood Avenue, and there we see Mike Azarian. The > card (if they gave you one) lists all of their offices with contact numbers. > If you are unhappy with where you are going you may want to try the one at > children's, or you may want to try cranial tech. After researching this I > was really concerned that we decided to go with the locally made versus the > Doc or starbands, but we decided to give it a try and if we were unhappy > after a month we would look into switching. I'm sure by luck, but within > the first 2 weeks of wearing it hit a growth spurt and you could easily > see the improvement. From there on we stuck with it and have been very > happy with their service and results. I have called on various occaisions > with questions and they have always talked to me (and didn't treat me like a > neurotic mother!) > > 's condition was considered moderate with a 13.5 difference on the > measurement, the last time we went he was considered mild and had a 5 > measurement. We will be in Western Mass. for easter weekend (I don't know > if that's where Wilmington is or not), but we'll be in West Springfield and > Goshen visiting family. If that is close to you we could try to meet up for > coffee and you could see , sporting his helmet, and get a better overall > picture. I have about a hundred million pictures of him in it, but our > scanner has been broken so I have not found a way to email them as of yet! > > You are doing the right thing by researching all options. I found that the > majority of this group uses the DOC band and they will be able to provide > you with a lot more info. on that. It's a very difficult choice to make, to > band or not, and if so, what type to use. For us, our decision was made for > us by our neuro, as we didnt' even know there were different options out > there. Again, we gave it a try for a month and were very happy so we > continued. Both economically, and geographically, Nopco at Children's has > worked out for us- we had the option of going to a nopco a little closer to > home, but have really liked working the Mike so the drive to Boston has been > worth it. > > Good luck with Reid, I'm sure what ever you decide will be for the best! > > ~ > > Re: Plagiocephaly - Nopco in Boston? HELP! > Importance: High > > > Hi - > I just talked to Nopco again this morning and the CPO I spoke with barely > could answer my questions and I am really really concerned. I dont want to > sound like a crazy mom but i told him when we came in we didnt see any > pictures I have no idea what the helmut looks like. I told him I would > prefer one with the open top (similar to a band) and he said it is closed on > the top with holes throughout the whole helmut. I asked why it was closed on > the top and what advantage does that have over the open and he stumbled and > couldn't answer me. The pictures I have seen on the web with the open bands > look so cute on the children. I have seen none that are an actual helmut, > especially on a 4 1/2 month old. I asked him if he had any pictures and he > said he may be able to find one and if he could how could he get it too me? > I asked what kind of technology they had there, for instance could he scan > it and email it to me and he said no not there but he might be able to do > it from home???? I feel like I'm dealing with a ma and pa shop! I can't even > believe they dont have pictures of their patients and success stories. What > should I do, was this like your experience? Should I go to the othe nopco or > travel to Cranial Tech.???I just want to do the best thing for Reid. > > Thank you so much for your response and I really hope things go well with > and he gets out of his helmut in 2 weeks > > Much Thanks - > > Sue, Reid's mom > > > ----- Original Message ----- > > ADVERTISEMENT > > <http://rd./M=215002.1818248.3328688.1261774/D=egroupweb/S=17 051261 > 71:HM/A=847665/R=0/*http://ads.x10.com/? bHlhaG9vbW9uc3RlcjcuZGF0=1016205168% > 3eM=215002.1818248.3328688.1261774/D=egroupweb/S=1705126171:HM/A=84766 5/R=1> > > > <http://us.adserver./l? M=215002.1818248.3328688.1261774/D=egroupmai > l/S=1705126171:HM/A=847665/rand=128014973> Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.