Guest guest Posted June 17, 2010 Report Share Posted June 17, 2010 <<<That's an interesting thought Kirsty - I'd like something to do regular clean ups on my outdoor cat enclosure area which has a synthetic carpet like matting on the floor. So I'm all ears on whether the chlorine dioxide can be used that way to destroy fleas/larvae/eggs.>>> Well, I think I will be using it in all outdoor areas regularly. I recently noticed some mould spores on windows inside my house and freaked out! I have a room where my kitties always spend the night in their own little condos and even tho I keep it spotless - it still had a sort of musty odour, so I figure mould and stuff I can't really see. So I did the room treatment with 1 tsp of 28% activated with 3 tsp of citric acid, in a saucer. Shut the room up for 24 hours. And WOW, this room now smells so different - clean and fresh, three weeks later. It took a few days to get the chlorine smell out afterwards and kitties had to reside elsewhere for a few nights, but it sure was worth doing. We get horrible mould here on the outside walls of the houses, even in summer, I might spray the house itself. <<<Diatomaceous earth reputedly will do the job and borax will too but I don't really want fine grey powder (diatomaceous earth) through my cream Ragdoll coats and if I use the borax (1/3 cup per bucket of hot water) I would need to make it into a liquid, wet the matting, then wait for it to dry. Summer wouldn't be too bad, but even in our warm winters it could take days to dry properly.>>> Never could figure out using the DE... found it far to fine and dusty. And it has to actually contact the fleas to kill them, so a decent cover is needed. And please be careful with your cats & the borax (toxic). <<<I've also discovered a company, Auschem, in Australia that sells the flakes/crystals but as yet haven't had a reply to my email.>>> If you are interested in the product I bought, which is prepared in an all ready to use strength, it is about $14 for a 5 litre of 0.1% (1000ppm). It is called Breathe Ezi. But would certainly be cheaper to get the flakes and make your own. The contact details are: Lionel Freedman, Zychem Technologies Pty Ltd, Unit 5, 14 Kohl street, Upper Coomera, Qld., 4209 Ph: 07 55805948 Mobile: 0412 762453 Email: lionel.freedman@... regards Kirsty Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 17, 2010 Report Share Posted June 17, 2010 Thanks Kirsty, Yes, I too have reservations about using borax for treating my cat enclosure. I think DE is most useful given in feed to remove parasites and in stored animal feeds to prevent insect infestation. I guess the MMS flakes mean I can make up any strength I want, so at the moment that appeals to me ) Will keep the contact details from your supplier on hand though, as you never know I might need it some time. The room treatment you did sounds like an excellent result. Carole in OzEideann & Fionn (Tristania GSDs)carole@...www.berigorafarm.com.au <<<That's an interesting thought Kirsty - I'd like something to do regular clean ups on my outdoor cat enclosure area which has a synthetic carpet like matting on the floor. So I'm all ears on whether the chlorine dioxide can be used that way to destroy fleas/larvae/eggs.>>> Well, I think I will be using it in all outdoor areas regularly. I recently noticed some mould spores on windows inside my house and freaked out! I have a room where my kitties always spend the night in their own little condos and even tho I keep it spotless - it still had a sort of musty odour, so I figure mould and stuff I can't really see. So I did the room treatment with 1 tsp of 28% activated with 3 tsp of citric acid, in a saucer. Shut the room up for 24 hours. And WOW, this room now smells so different - clean and fresh, three weeks later. It took a few days to get the chlorine smell out afterwards and kitties had to reside elsewhere for a few nights, but it sure was worth doing. We get horrible mould here on the outside walls of the houses, even in summer, I might spray the house itself. <<<Diatomaceous earth reputedly will do the job and borax will too but I don't really want fine grey powder (diatomaceous earth) through my cream Ragdoll coats and if I use the borax (1/3 cup per bucket of hot water) I would need to make it into a liquid, wet the matting, then wait for it to dry. Summer wouldn't be too bad, but even in our warm winters it could take days to dry properly.>>> Never could figure out using the DE... found it far to fine and dusty. And it has to actually contact the fleas to kill them, so a decent cover is needed. And please be careful with your cats & the borax (toxic). <<<I've also discovered a company, Auschem, in Australia that sells the flakes/crystals but as yet haven't had a reply to my email.>>> If you are interested in the product I bought, which is prepared in an all ready to use strength, it is about $14 for a 5 litre of 0.1% (1000ppm). It is called Breathe Ezi. But would certainly be cheaper to get the flakes and make your own. The contact details are: Lionel Freedman, Zychem Technologies Pty Ltd, Unit 5, 14 Kohl street, Upper Coomera, Qld., 4209 Ph: 07 55805948 Mobile: 0412 762453 Email: lionel.freedman@... regards Kirsty __________ Information from ESET Smart Security, version of virus signature database 4580 (20091106) __________The message was checked by ESET Smart Security.http://www.eset.com Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 19, 2010 Report Share Posted June 19, 2010 Animal keepers and pet owners are faced with the dilemma of disinfecting and cleaning all animal spaces while at the same time causing no harm to the animals themselves, and the people who work there. Most deaths of pets are premature and unnecessary, according to many veterinarians . The best answer to date has been to remove pets from their enclosures, scrub the habitat clean, and treat the enclosure with one of a number of nasty (and often expensive) chemicals. It is then necessary to wash everything down, and hope that there is no dangerous contamination lingering from either the pathogens or the disinfectant. The issue is that disinfectants are generally toxic; most good disinfectants are not safe to use around pets. The newest approach involves the use of Stabilized Chlorine Dioxide. Chlorine dioxide is a truly remarkable substance.!It is a fast acting broad spectrum disinfectant that also destroys almost all of the `bad' bugs on contact!It is difficult to get the performance from other products while still having safety for pets who may be sensitive to more toxic chemicals.. it is extremely powerful, killing bacteria, viruses and fungi. Chlorine Dioxide creates no harmful odors; in fact it is an excellent deodorizer. Chlorine Dioxide's chemistry is radically different to that of chlorine by itself. Both products are oxidizing agents. But, because of their fundamentally different chemistry they react in distinct ways with organic compounds, and as a result, generate very different byproducts. Chlorine dioxide does not affect cell walls (which is why it is safe to use around living things), while chlorine tends to react with organic matter by attacking cell walls and creating toxic and carcinogenic byproducts.) Chlorine Dioxide disassembles organic compounds rendering them harmless. It is this difference that explains the superior performance of chlorine dioxide. The anti-microbial efficacy of chlorine dioxide against bacteria, fungi, viruses and protozoa has been repeatedly demonstrated and documented. It has a low toxicity, as verified by the EPA, is not harsh to you, the environment, or your pets. Chlorine Dioxide is a natural anti-inflammatory, along with the disinfecting properties, making it useful for wound treatment. Veterinarians have found that a mixture of chlorine dioxide and aloe vera is a safe and good approach to healing incisions and wounds. Chlorine Dioxide t is the one true deodorizer for pet owners, one which will eliminate odor, protect the environment, and cause no harm to the owner or his pets. As a product registered by the Environmental Protection Agency to be safe, harmless to pets and people, hypoallergenic, biodegradable, non-staining, non-bleaching, you can know you have selected the best product on the market for you and your pet. http://healthfreedoms.org/2010/03/24/using-chlorine-dioxide-to-effect-a-safe-cle\ an-disinfected-place-for-your-pets/ --- In , " Carole " <carole@...> wrote: > > Thanks Kirsty, > > Yes, I too have reservations about using borax for treating my cat enclosure. > > I think DE is most useful given in feed to remove parasites and in stored animal feeds to prevent insect infestation. > > I guess the MMS flakes mean I can make up any strength I want, so at the moment that appeals to me ) Will keep the contact details from your supplier on hand though, as you never know I might need it some time. > > The room treatment you did sounds like an excellent result. > > Carole in Oz > Eideann & Fionn (Tristania GSDs) > carole@... > www.berigorafarm.com.au > > <<<That's an interesting thought Kirsty - I'd like something to do regular clean ups on my outdoor cat enclosure area which has a synthetic carpet like matting on the floor. So I'm all ears on whether the chlorine dioxide can be used that way to destroy fleas/larvae/eggs.>>> > > Well, I think I will be using it in all outdoor areas regularly. > I recently noticed some mould spores on windows inside my house and freaked out! I have a room where my kitties always spend the night in their own little condos and even tho I keep it spotless - it still had a sort of musty odour, so I figure mould and stuff I can't really see. > So I did the room treatment with 1 tsp of 28% activated with 3 tsp of citric acid, in a saucer. Shut the room up for 24 hours. And WOW, this room now smells so different - clean and fresh, three weeks later. It took a few days to get the chlorine smell out afterwards and kitties had to reside elsewhere for a few nights, but it sure was worth doing. > We get horrible mould here on the outside walls of the houses, even in summer, I might spray the house itself. > > <<<Diatomaceous earth reputedly will do the job and borax will too but I don't really want fine grey powder (diatomaceous earth) through my cream Ragdoll coats and if I use the borax (1/3 cup per bucket of hot water) I would need to make it into a liquid, wet the matting, then wait for it to dry. Summer wouldn't be too bad, but even in our warm winters it could take days to dry properly.>>> > > Never could figure out using the DE... found it far to fine and dusty. And it has to actually contact the fleas to kill them, so a decent cover is needed. And please be careful with your cats & the borax (toxic). > > <<<I've also discovered a company, Auschem, in Australia that sells the flakes/crystals but as yet haven't had a reply to my email.>>> > > If you are interested in the product I bought, which is prepared in an all ready to use strength, it is about $14 for a 5 litre of 0.1% (1000ppm). It is called Breathe Ezi. But would certainly be cheaper to get the flakes and make your own. > The contact details are: Lionel Freedman, Zychem Technologies Pty Ltd, Unit 5, 14 Kohl street, Upper Coomera, Qld., 4209 > Ph: 07 55805948 Mobile: 0412 762453 > Email: lionel.freedman@... > > regards > Kirsty > > > > > > > __________ Information from ESET Smart Security, version of virus signature database 4580 (20091106) __________ > > The message was checked by ESET Smart Security. > > http://www.eset.com > > > > __________ Information from ESET Smart Security, version of virus signature database 4580 (20091106) __________ > > The message was checked by ESET Smart Security. > > http://www.eset.com > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 19, 2010 Report Share Posted June 19, 2010 Basic question. I have a bottle of MMS. How, specifically, do I mix it and with how much water to wash the floor or clean places I need to disinfect? How about how much should I use in my rug cleaner for a stinky rug? Peanut PS To the Moderator, I don't know if it is ok or not to include personal business sites at the end of a post. One is for a cd we have done and the other is for my husbands photography. Do let me know. thanks. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 19, 2010 Report Share Posted June 19, 2010 I use 5 activated drops for each gallon of water for floors countertops, ect. In the fogger I use 10 drops activated to each gallon, but I leave the room. --- In , " Peanut " <wiley2001@...> wrote: > > > > Basic question. I have a bottle of MMS. > How, specifically, do I mix it and with how much water to wash the floor or clean places I need to disinfect? > > How about how much should I use in my rug cleaner for a stinky rug? > > Peanut > > PS To the Moderator, I don't know if it is ok or not to include personal business sites at the end of a post. One is for a cd we have done and the other is for my husbands photography. Do let me know. thanks. > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 19, 2010 Report Share Posted June 19, 2010 Here are simple instructions for many other uses of mms. http://healthfreedoms.org/2010/01/15/home-uses-for-mms-chlorine-dioxide/ --- In , " healinghope " <mfrreman@...> wrote: > > I use 5 activated drops for each gallon of water for floors countertops, ect. In the fogger I use 10 drops activated to each gallon, but I leave the room. > > --- In , " Peanut " <wiley2001@> wrote: > > > > > > > > Basic question. I have a bottle of MMS. > > How, specifically, do I mix it and with how much water to wash the floor or clean places I need to disinfect? > > > > How about how much should I use in my rug cleaner for a stinky rug? > > > > Peanut > > > > PS To the Moderator, I don't know if it is ok or not to include personal business sites at the end of a post. One is for a cd we have done and the other is for my husbands photography. Do let me know. thanks. > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 19, 2010 Report Share Posted June 19, 2010 Very informative. Thank you! :-) "Fear not, little one. I sustain you in my hand and protect you. I love you. Receive it!" says the Lord.From: healinghope <mfrreman@...> Sent: Sat, June 19, 2010 10:39:27 AMSubject: [ ] Re: Fogging and room treatment Here are simple instructions for many other uses of mms. http://healthfreedoms.org/2010/01/15/home-uses-for-mms-chlorine-dioxide/ > > > > > > > > Basic question. I have a bottle of MMS. > > How, specifically, do I mix it and with how much water to wash the floor or clean places I need to disinfect? > > > > How about how much should I use in my rug cleaner for a stinky rug? > > > > Peanut > > > > PS To the Moderator, I don't know if it is ok or not to include personal business sites at the end of a post. One is for a cd we have done and the other is for my husbands photography. Do let me know. thanks. > > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted June 19, 2010 Report Share Posted June 19, 2010 Hello Peanut. MMS is a 22.4% sodium chlorite solution that can be dangerous to handle. I recommend diluting it down to a 5% concentration for safety. To make a 5% concentration put 55.8 ml into a container and add enough water to make 250 ml total. Now you have 250 ml of 5% sodium chlorite. Chlorine dioxide is not a detergent. Clean your floors and rugs first, then deodorize and sanitize using a chlorine dioxide solution. To make up a sanitizing spray, in a glass put 10 ml of 5% sodium chlorite and add 10 ml of 10% citric acid. Swirl to mix and let that activate for 10 minutes. Pour this into a spray bottle and add enough water to make 500 ml. Spray as needed on counters and on the floor. This can also be used to spray " hot spots " in your rug. We have been trying a little different solution on rugs with the idea to protect them from long term mildew or mold. This solution is made by adding 16 ml of 5% sodium chlorite to 1 liter of water for synthetic material, or 8 ml of 5% sodium chlorite to 1 liter of water for natural material. This solution is put into a rug machine and worked into the rug after the rug has been cleaned. The problem with this method is that if you spill a low PH fluid like vinegar, cola, or lemon juice on the rug, there is a possibility of bleaching the color from the rug. While we have not experienced this, it is a possibility. You can reduce the amount of sodium chlorite down to 4 ml of the 5% per liter of water, but this may not be totally effective. This part is still a work in progress so use as your own risk. Tom --- In , " Peanut " <wiley2001@...> wrote: > > > > Basic question. I have a bottle of MMS. > How, specifically, do I mix it and with how much water to wash the floor or clean places I need to disinfect? > > How about how much should I use in my rug cleaner for a stinky rug? > > Peanut > > PS To the Moderator, I don't know if it is ok or not to include personal business sites at the end of a post. One is for a cd we have done and the other is for my husbands photography. Do let me know. thanks. > Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.