Poor Man's Rife

[Guest guest]

Hello Dennis,

first of all, welcome to the list.

Your question sounds like a technical question for a Rife/Bare type device.

May I suggest you join the rife-list and/or

rifers groups and ask that question there. Both those lists

are specialised in answering just those kinds of questions and you will

undoubtably get good advice.

As there are already two lists covering the technicalities of building your

own plasma device, this list covers everything in the Rife world except such

technical questions.

Regards

List Moderator

Poor Man's Rife

> Hello,

>

> I just joined the group and have a question. I've been aware of

> Rife technology for years but have only recently decided to build a

> unit. I started with an inexpensive one based on the info on

> www.holman.net using a battery charger, ignition coil, etc. My question

> is, does anyone know where I can get info on the correct method of

> attaching the plasma tube to the unit?

>

> Dennis Harwood

[Guest guest]

I finally got my PMR unit working. Now I get to go through all the

stuff about what frequency, how long, etc., etc.

Does anybody have any feel for how wide of an area these devices are

effective in? Do I need to be real close to benefit or can I be in the

same room or next room or what? I've got a 6 amp battery charger

powering my unit. Does anyone know if a 10 amp or 12 amp charger

would up the output enough to be worth the investment?

I was using the Blaster 5 program and just picking some frequency

sets at random for 1 to 2 minutes apiece. I did about an hour the first

time with number 1 and went through number 4 before quitting. I noticed

that I was getting progressively more tired and was very badly wanting

to go lie down before I finished. I felt better about an hour or so

later . I'm assuming I hit some frequencies that caused some reactions,

so I'll probably do the same thing again and see what happens.

I'm still wondering about the best program to use. Blaster 5 is as

simple and easy as it gets, but is there a program that will let me pick

specific frequencies that is also easy to use?

Dennis