Sick Building Syndrome Information

[Guest guest]

Sick Building Syndrome Information

Joe E. Heimlich

http://www.healthgoods.com/Education/Healthy_Home_Information/Indoor_Air_Quality\

/sick_building_info.htm

People spend most of their time indoors with some estimates being that humans

spend more than 90% of their lives inside constructed environments. Over time,

the construction of buildings has increasingly focused on energy efficiency and

comfort. Central heating and cooling systems are the norm, and home and office

construction has moved toward minimizing heat or cool air loss by making

buildings more airtight. At the same time, more complex materials are being used

for furniture, clothing, fabrics, cleaners, detergents, and preservatives.

Coupled, these and other parallel trends have created buildings where the

exposure to foreign proteins, dusts, and gases through inhalation has gone far

beyond what historically has been the case. This fact sheet discusses the

concept of the " sick building syndrome, " the types of allergens or stimuli most

likely to be found in today's buildings, and how individuals can better cope

with contemporary construction of indoor environments.

What is " Sick Building Syndrome " ?

In the 1970s, health care providers were faced with increasing numbers of people

having headaches and allergic-like reactions to unspecified stimuli. Some of the

reactions included lethargy, fatigue, headache, dizziness, nausea, irritation of

mucous membranes, eye and/or nasopharyngeal irritation, and sensitivity to

odors. Through exploration over several years, these reactions were linked to

common symptoms of people in specific buildings and a lack of symptoms when

these people were not in the buildings. This spectrum of specific and

non-specific complaints, when tied to a particular building, became known as the

" sick building syndrome. " It is important to note that " sick building syndrome "

is not the same as " building related illness " which refers to a specific

airborne building contaminant. One well known example of this is Legionnaires'

Disease.

" Sick building syndrome " is often more prevalent among asthmatics among whom

there is a large percentage of allergies to common indoor allergens. Indoor air

pollution also disproportionately affects some populations, such as African

Americans living in inner city homes that are not modernized. For these

populations, there is a three to five times greater risk of asthma mortality

than Caucasians, which may be compounded by a variety of sources including

rat/cockroach infestations, sanitary conditions, and education as well as indoor

air pollution.

What are the Sources of Pollution?

There are four broad categories of contributors to " sick building syndrome. "

Other fact sheets in this series address some of these sources.

Major Combustion Pollutants

Malfunctioning or inappropriate, inefficient use of heating devices can produce

pollutants at harmful levels. Carbon monoxide (CO), which is an asphyxiant, and

nitrogen dioxide (NO2) and sulfur dioxide (SO2), which are irritants, are three

of the more common products of combustion pollutants in the home. Methelyne

chloride, which is in some household products such as paint strippers, can also

be metabolized to form CO.

Biological Air Pollutants

Found everywhere, dander, molds, dust mites, and other biologicals are carried

by animals and people into and throughout homes and buildings. High relative

humidity, flooding, inadequate exhaust of bathrooms or kitchens, humidifiers,

dehumidifiers, air conditioners, drip pans under cooling coils, pets, and

components of heating, ventilation, and air conditioning (HVAC) systems are all

sources of biological air pollutants. Three types of human disease can come from

these biological pollutants: infections in which pathogens invade human tissue;

hypersensitivity diseases which involve specific activity of the immune system;

and toxicosis in which biologically produced chemical toxins cause direct toxic

effects. In many cases, " sick building syndrome " may be related to microbial

contamination in buildings.

Volatile Organic Compounds

At room temperature, volatile organic compounds, or VOCs, are emitted as gases

from certain solids and liquids. These include formaldehyde, pesticides,

solvents, cleaning agents, benzene, and perchloroethylene. In some EPA studies,

indoor levels of some VOCs can be up to ten times greater than outdoors. A wide

array of potential sources of VOCs exists in the home and in the office. Scents

and hair sprays, household products such as finishes, rug and oven cleaners,

paints, thinners, dry cleaning fluids, some copiers and printers, some glues and

adhesives, markers, and photo solutions are among some of the common products

that may emit VOCs. One of the major irritants in " sick building syndrome " is

formaldehyde. Although urea-formaldehyde foam insulation is no longer used,

buildings which had the blown foam in the 1970s may still have VOCs from the

insulation. Formaldehyde is also found in resins in finishes, in plywood,

paneling, fiberboard and particle board, and in some of the backings and

adhesives for carpets. New installations, carpet, wall coverings, paint, or

construction can all heighten problems with VOCs.

Heavy Metals

Over the past several decades, the potential for casual exposure to heavy metals

in buildings has been significantly reduced. Lead was removed as an ingredient

in paints starting in the 1940s and was completed banned in 1978. In August

1990, mercury (threat in the vapor, not in the paint) was removed from indoor

latex paints and in 1991 from outdoor latex paints and was replaced with a

different, less toxic chemical to extend shelf-life and kill mold and mildew.

Although still a concern, the likelihood of inhalation of heavy metals in most

buildings is minute. The concern about heavy metals as an indoor air pollutant

is greatest in older, deteriorating housing or during rehab or reconstruction

projects of older buildings.

How Can I Know if a Health Reaction is Due to a Sick Building?

There are two components to identifying a sick building. The first is that the

reactions or types of reactions are shared by several or many of the people who

also inhabit the building. The second is that the reactions are triggered when

in the building and are not triggered when not in the building. Individuals,

however, may have greater sensitivities to some stimuli than do other people.

For these individuals, something or things in the building may be triggering a

reaction, but the building may not be " sick. " This is often the case when a

certain office or part of a building is rehabbed or reconfigured and decorated.

That particular area of the building may create reactions in individuals, but

the building itself is not problematic.

What Can I Do?

The best way to deal with potential reactions to a sick building, is to

understand the reasons a building may be " sick. " The predominant culprit in most

buildings is the flow of air. Fresh air and air movement patterns keep a

building " flushed. " As buildings become sealed or an interior is redesigned and

changes the air flow, air may not move as freely and the contaminants can

accumulate in the closed space. Poorly designed or maintained ventilation

systems (HVAC) can also create problems, especially in situations where the

pollutants can " buildup " over time due to poor air exchange.

The second cause can be a synergistic or combination interaction among low

levels of specific pollutants. In these cases, when the specific pollutants are

identified, the contributing factors are removed or altered to minimize the

effect. For individuals, specific causes may be traced through " histories " of

other situations in which the individual has had similar reactions.

Other factors that can contribute to the symptoms associated with " sick building

syndrome " are some that can be relatively easily maintained. Too low or too high

a humidity level or changes in relative humidity in a building can aggravate

individuals. Too low humidity can increase dust and particulate indoor

pollution, and too high humidity can provide a breeding ground for molds and

fungi. Poor lighting can increase eye strain and result in symptoms similar to

" sick building syndrome. " Extreme temperature fluctuations in a building can

serve to release VOCs and molds/fungi.

If you suspect a building of " making you sick, " first track your reactions. What

types of reactions, what are the triggers for the reaction, and do the reactions

abate when you are not in the building? Next, examine the building for things

you can control. Can you open windows or doors to improve air flow? Many types

of adjustments that could alleviate sick building symptoms require major

structural changes in building infrastructure. So, as an individual, you will

have to find the things that you can control. Can you minimize the temperature

changes within the building? Are there individual activities, such as the use of

colognes or perfumes, soaps, shampoos, deodorants, perfumes in detergents, and

air fresheners that can be controlled by individuals within the building?

Finally, if you believe it is a building that is sick, gather the evidence from

multiple occupants of the building - and if possible have all occupants meet

with one or a few health care providers - and contact the owner of the building

and your local health department.

--------------------------------------------------------------------------------

Ohio State University Fact Sheet