Jump to content
RemedySpot.com

mold removal

Rate this topic


Guest guest

Recommended Posts

Guest guest

Wow, this is a hard one. Mold removal is really hard especially for us. Once you

disturb it, it tends to grow & spread so it is really hard.

Even the so called professionals mess this up all the time. She should get some

bids and find out how they actually handle this & make the best decision she can

make on it.

 

I was initially injurred by mold in my work building & have severe damage now

due to the inept removal of the mold in this biulding. It spread & was really

bad.

 

Dr Gray in Bensen is a well known well respected mold specialists/toxicalolgist.

He may be able to give some guidelines. He's my doctor.

 

If she has had the mold for a long time & didn't know it, it very well could be

the cause of her ES. She can contact me if she wants to.

 

Loni

From: Mumper <zil_mumper@...>

Subject: mold removal

Date: Tuesday, May 26, 2009, 5:30 AM

Hi Everyone,

I recently met a girl who is chemically sensitive and needs to have mold removed

from her home. Neither of us know anything about safely removing mold. Is there

any advice you can give us?

 

Thank you!

Link to comment
Share on other sites

Guest guest

get a pro or read this:

http://www.mold-control-on-a-budget.com/

On Tue, May 26, 2009 at 6:30 AM, Mumper <zil_mumper@...>wrote:

>

>

> Hi Everyone,

> I recently met a girl who is chemically sensitive and needs to have mold

> removed from her home. Neither of us know anything about safely removing

> mold. Is there any advice you can give us?

>

> Thank you!

>

>

>

Link to comment
Share on other sites

Guest guest

What am I doing up in the middle of night? Who knows, it's been a strange week.

I don't how much mold there is, but I have heard of people using Thieves

essential oil (by Young Living if you need a quality source), and dispersing

that with the ?nebulizer things that are sold for that. Trying to remember just

where this came from. Local radio show, but was it a local person, or elsewhere,

I can't recall. Anyway, the oils in them are suppose to destroy the mold, and

even if the infestation is heavy, dispersing this in the air may bring good

relief in the meantime.

I have a lot of chemical and natural allergies, but very few reactions to the

pure oils. So if chemicals are a big problem, oil purity is extra important,

some, just like cooking oils, are extracted with hexane or other chemicals.

Aromaland.com has some good quality organic essential oils, I'm not sure if all

the ones needed to make up the Thieves blend. Young Living does have it already

made up however.

BTW, all the oils have their own frequencies as well, maybe someone with a meter

could experiment and see if there seem to be any protective ones? Pure rose oil

is suppose to be the highest, don't remember the frequency though. Extra pricey!

Hope that helps,

~ Snoshoe

>

> >

> >

> > Hi Everyone,

> > I recently met a girl who is chemically sensitive and needs to have mold

> > removed from her home. Neither of us know anything about safely removing

> > mold. Is there any advice you can give us?

> >

> > Thank you!

> >

> >

Link to comment
Share on other sites

Guest guest

hi, Snoshoe and ,

 

wanted to thank you, Snoshoe, for recommending taurine to use along w the

manganese!  yes, it works better.  bless you!

 

i may have mentioned using thieves oil--have to use pure oils--yes!  i was told

to try an ozone machine by dr. Rae's staff (i think they recommended it for

pesticides and mold) and a peroxide generator by a building biologist for mold. 

i reacted badly to both of those--couldn't use either while present and ozone

bothered me also after.  the peroxide machine not so much.  the blding

bio offered a peroxide generator free to try, for only cost of postage.  i

finally got a good nebuliaer to put thieves oil into the air and that helped

much more.  the ozone and perroxide do work for particular molds.  i had asthma

from them.  i really liked the thieves oil but that doesn't mean all w mcs will

do ok on it.  it must be pure essential oils.  it is a mix of cinnamon,

cloves,...i forget--7 oils i think.  also important to keep humidity down to

below 35 " %.  this alone will kill mold but remember you can react to dead mold

too--must also clean. 

better to have someone else chlorox walls, etc, and then

use dehumidifiers if possible.

 

di

From: snoshoe_2 <snoshoe_2@...>

Subject: Re: mold removal

Date: Wednesday, May 27, 2009, 2:36 AM

What am I doing up in the middle of night? Who knows, it's been a strange week.

I don't how much mold there is, but I have heard of people using Thieves

essential oil (by Young Living if you need a quality source), and dispersing

that with the ?nebulizer things that are sold for that. Trying to remember just

where this came from. Local radio show, but was it a local person, or elsewhere,

I can't recall. Anyway, the oils in them are suppose to destroy the mold, and

even if the infestation is heavy, dispersing this in the air may bring good

relief in the meantime.

I have a lot of chemical and natural allergies, but very few reactions to the

pure oils. So if chemicals are a big problem, oil purity is extra important,

some, just like cooking oils, are extracted with hexane or other chemicals.

Aromaland.com has some good quality organic essential oils, I'm not sure if all

the ones needed to make up the Thieves blend. Young Living does have it already

made up however.

BTW, all the oils have their own frequencies as well, maybe someone with a meter

could experiment and see if there seem to be any protective ones? Pure rose oil

is suppose to be the highest, don't remember the frequency though. Extra pricey!

Hope that helps,

~ Snoshoe

>

> >

> >

> > Hi Everyone,

> > I recently met a girl who is chemically sensitive and needs to have mold

> > removed from her home. Neither of us know anything about safely removing

> > mold. Is there any advice you can give us?

> >

> > Thank you!

> >

> >

Link to comment
Share on other sites

Guest guest

ps--if chlorox is used it will need several rinses--but i think you initaially

have to leave it on 20 to 30 mins.  the chlorox seems to disipate after several

days, but also you can't be present during that time

From: snoshoe_2 <snoshoe_2 (DOT) com>

Subject: Re: mold removal

groups (DOT) com

Date: Wednesday, May 27, 2009, 2:36 AM

What am I doing up in the middle of night? Who knows, it's been a strange week.

I don't how much mold there is, but I have heard of people using Thieves

essential oil (by Young Living if you need a quality source), and dispersing

that with the ?nebulizer things that are sold for that. Trying to remember just

where this came from. Local radio show, but was it a local person, or elsewhere,

I can't recall. Anyway, the oils in them are suppose to destroy the mold, and

even if the infestation is heavy, dispersing this in the air may bring good

relief in the meantime.

I have a lot of chemical and natural allergies, but very few reactions to the

pure oils. So if chemicals are a big problem, oil purity is extra important,

some, just like cooking oils, are extracted with hexane or other chemicals.

Aromaland.com has some good quality organic essential oils, I'm not sure if all

the ones needed to make up the Thieves blend. Young Living does have it already

made up however.

BTW, all the oils have their own frequencies as well, maybe someone with a meter

could experiment and see if there seem to be any protective ones? Pure rose oil

is suppose to be the highest, don't remember the frequency though. Extra pricey!

Hope that helps,

~ Snoshoe

>

> >

> >

> > Hi Everyone,

> > I recently met a girl who is chemically sensitive and needs to have mold

> > removed from her home. Neither of us know anything about safely removing

> > mold. Is there any advice you can give us?

> >

> > Thank you!

> >

> >

Link to comment
Share on other sites

Guest guest

I have been trying to remove mold and decided to move.

The book related to mold control on a budget is good. The first think you can do

is buy the best furnace filter available at the local stores. Whenever you

change filters have a garbage bag right there to inclose it, wear a face mask

and googles that fit tight around your eyes. They explain what kind of face mask

from the hardware store. Also i suggest a hat since dust can get in your hair

and when you take the mask off it can be stirred up and breath it. I willget

undressed in front of the washing machine and don't take my mask amd goggles off

until i am in the shower. When you change vacuum cleaner bags be fully

protected, too. This is the most intense exposure to dust and i went poking

through a bag looking for a ring and got it in my eyes and it damage my skin. I

had on a mask but no goggles or hat.

Some people us a drug called chloresteroline or something like that, spelling?

I am trying a supplement from Young Living, something Defense. Also their oil

for liver detox. I can't get up to look, i have to deal with so many things,

gotta go...

> get a pro or read this:

> http://www.mold-control-on-a-budget.com/

>

> On Tue, May 26, 2009 at 6:30 AM, Mumper <zil_mumper@...>wrote:

>

> >

> >

> > Hi Everyone,

> > I recently met a girl who is chemically sensitive and needs to have mold

> > removed from her home. Neither of us know anything about safely removing

> > mold. Is there any advice you can give us?

> >

> > Thank you!

> >

> >

> >

Link to comment
Share on other sites

Guest guest

Does anyone know if simply throwing pure Borax powder (boric acid) on black mold

will do the trick? (There's some in the shower between the tiles in the corner).

I don't know if it's the really bad kind of black mold, but I'm sure it's

probably better off not being there.

I've heard Borax will kill mold and help prevent its return; my concern is if it

will send the mold into " panic mode " and get it releasing spores like crazy to

ensure its survival. Ack!

R.

> >

> > >

> > >

> > > Hi Everyone,

> > > I recently met a girl who is chemically sensitive and needs to have mold

> > > removed from her home. Neither of us know anything about safely removing

> > > mold. Is there any advice you can give us?

> > >

> > > Thank you!

> > >

> > >

> > >

Link to comment
Share on other sites

Guest guest

You need to remove rather than clean. It will proliferate. Loni

From: rticleone <rticleone@...>

Subject: Re: mold removal

Date: Thursday, May 28, 2009, 5:26 AM

Does anyone know if simply throwing pure Borax powder (boric acid) on black mold

will do the trick? (There's some in the shower between the tiles in the corner).

I don't know if it's the really bad kind of black mold, but I'm sure it's

probably better off not being there.

I've heard Borax will kill mold and help prevent its return; my concern is if it

will send the mold into " panic mode " and get it releasing spores like crazy to

ensure its survival. Ack!

R.

> >

> > >

> > >

> > > Hi Everyone,

> > > I recently met a girl who is chemically sensitive and needs to have mold

> > > removed from her home. Neither of us know anything about safely removing

> > > mold. Is there any advice you can give us?

> > >

> > > Thank you!

> > >

> > >

> > >

Link to comment
Share on other sites

Guest guest

Borax and Boric Acid are not the same thing, but they are family.

http://en.wikipedia.org/wiki/Borax

http://en.wikipedia.org/wiki/Boric_acid

The first is used in cleaning,

the second in pestcontrol.

Grts

Bruno M.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

> > >

> > > >

> > > >

> > > > Hi Everyone,

> > > > I recently met a girl who is chemically sensitive and needs to have mold

> > > > removed from her home. Neither of us know anything about safely removing

> > > > mold. Is there any advice you can give us?

> > > >

> > > > Thank you!

> > > >

> > > >

> > > >

Link to comment
Share on other sites

Guest guest

Dang. We're going to do the bathroom anyway, it just comes down to when we can

afford it. Hopefully in the meantime, it won't be too problematic.

R.

> > >

> > > >

> > > >

> > > > Hi Everyone,

> > > > I recently met a girl who is chemically sensitive and needs to have mold

> > > > removed from her home. Neither of us know anything about safely removing

> > > > mold. Is there any advice you can give us?

> > > >

> > > > Thank you!

> > > >

> > > >

> > > >

Link to comment
Share on other sites

Guest guest

Oops! Didn't know that; thanks. I was thinking of using 'Borax', the powder

sold in grocery stores.

R.

-

-- In , " Bruno M. " <brunom1@...> wrote:

>

> Borax and Boric Acid are not the same thing, but they are family.

>

> http://en.wikipedia.org/wiki/Borax

> http://en.wikipedia.org/wiki/Boric_acid

>

> The first is used in cleaning,

> the second in pestcontrol.

>

> Grts

> Bruno M.

> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

>

>

>

> > > >

> > > > >

> > > > >

> > > > > Hi Everyone,

> > > > > I recently met a girl who is chemically sensitive and needs to have

mold

> > > > > removed from her home. Neither of us know anything about safely

removing

> > > > > mold. Is there any advice you can give us?

> > > > >

> > > > > Thank you!

> > > > >

> > > > >

> > > > >

Link to comment
Share on other sites

  • 4 weeks later...
  • 8 months later...
Guest guest

I have alittle bit of mold on the sheetrock in my bathroom, up over the shower,

I read that tea tree oil & water sprayed on mold & left there for a day or so

will get rid of the mold, has anyone tried that & did it work?

Once I spray it on, how long should I wait before showering, etc. or is that not

a problem?

Thanks

Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...