Re: Troubles w/ pendant PN eeg channel one+/ electrode connection

[Guest guest]

,You need to contact Pocket Neurobics (phone ) or support@.... This sounds like a repair problem. They can help you get the unit repaired (under warranty if appropriate).

Pete

I just started having trouble w/ my pendant PN and the channel

one/electrode connection. I tried different electrodes so I

know the trouble is not w/ the electrode cable but w/ the ch1+

contact/pin

the electrode plugs into. If I fiddle w/ the electrode/ch1+

connection, ie pull or push the electrode into the pendant ch1+ hole,

the

connection will be ok, but it is only in a very small area that the

contact between the pin and electrode seem to connect and produce a

signal similar to that of ch2+ in Bio Explorer. When not in this small

contact

area the signal is practically nil from ch1+ as compared to the ch2+

signal. Does anyone have any idea why this might suddenly be happening

and if so how I might possibly remedy the problem? Thx! -- Van Deusenpvdtlc@...

http://www.brain-trainer.com305/433-3160The Learning Curve, Inc.

[Guest guest]

Thanks Pete

I bought it in July so hopefully it will still be under warranty. I

hope they give you a new one before you have to send them the one in

need of repair.

I am enjoying your option protocol 2, w/ your design 7 so much that I

hate to go long w/ out doing it. I can't tell you how much that one

has changed my life already.

I e-mailed Pocket Neurobics and also posted on their yahoo group last

week but have had no luck w/ a reply yet. I will try a call and see

if I can get a response that way.

Thx!

>

> > I just started having trouble w/ my pendant PN and the channel

> > one/electrode connection. I tried different electrodes so I

> > know the trouble is not w/ the electrode cable but w/ the ch1+

> > contact/pin

> > the electrode plugs into. If I fiddle w/ the electrode/ch1+

> > connection, ie pull or push the electrode into the pendant ch1+

hole,

> > the

> > connection will be ok, but it is only in a very small area that

the

> > contact between the pin and electrode seem to connect and produce

a

> > signal similar to that of ch2+ in Bio Explorer. When not in this

small

> > contact

> > area the signal is practically nil from ch1+ as compared to the

ch2+

> > signal. Does anyone have any idea why this might suddenly be

happening

> > and if so how I might possibly remedy the problem? Thx!

> >

>

>

>

> --

> Van Deusen

> pvdtlc@...

> http://www.brain-trainer.com

> 305/433-3160

> The Learning Curve, Inc.

>