time to speak out

August 15, 2008

I have been on this group for some time and not posted in a long

time,I thought it time to speak out on the topic.I am an electronic

engineer and carefully followed this rife connection,I have copies of

his orginal circuits and notes he used to do his work with.The

circuits he used to drive the tube with reminds me an an old ham

tranmiter with an old audio generator driving it with.He used around

11 megaherze to drive the light tube with,with around a 100 watts of

radio signal drive.One night some years back I had a dream about his

work and a circuit came to mind just what to build that would reflect

his work the closest i could make it.Alot of these units claoming to

be a real rife is not it at all the best i can tell,I am an

electronic engineer and knoiw the differance to what he did verses

what is out there.Now things have advanced quite abit in electronics

since his day.Solid state devices can do so much more today.So the

following morning I awoke and went to the lab where i worked and i

breadboarded the circuit i saw in my dreams,and it worked perfect

right out of the gate.He used a sine wave imposed on a radio wave to

drive the light tube.I see square wave devices being used,square and

sine are very different in nature,square produces many harmonics.In

his day the light was put close to the body where the problem

was.Nowadays we have an edge on deliveying the energy field to the

entire body all at once.A compound called ferrite holds the answer to

doing this.Picture this if you an mri tunnel.Let's suppose we build a

table where a ferrite loop surrouds the body and moves slowly the

leanth of the body on a worm gear.This loop is actaully an antenna

with wire wrapped around the ferrite loop tuned to 11 megaherze.This

is driven with a radio frequency power amplier being modulated with a

pure sine wave.Within the ferrite loop perfect radio fields are given

to a person being totally engulfed within the field,all tissues would

be treated in this manor.The power has to be controlled as the loop

reahes the head of a person,it tripps a micro switch and cuts down

the power in the field.I have built the equipment on my own

time,using the goverments equipoment to check out how well the signal

is being generated.I have been after to do the work he once did,ther

is alot oalot of fake machines out there,and the people do not get

healed on them, i am not saying all machines are fake but i bet most

are making very large claims....cary

August 15, 2008

This concept may have been the basis for the Dotto machine. I have

original photos of the device when Dotto had his laboratory at the

University of Dayton. There are artist drawings that claimed to

levitate either the body or the entire machine. This was nonsense.

Dr. Stafford took a treatment on it and I have the photos he took.

The machine used regular 115 volt A.C. power. The hoop was cooled by

a regrigeration compressor and traveled along a track made from a

garage door opener. It appears to have been a large inductive loop

that was perhaps pulsed at some frequency. Dr. Stafford told me that

he thought Dotto was a crackpot who built large erector sets. He was

very skeptical of Dotto's claims as he had experienced a Rife machine

that produced results.

>

> I have been on this group for some time and not posted in a long

> time,I thought it time to speak out on the topic.I am an electronic

> engineer and carefully followed this rife connection,I have copies

of

> his orginal circuits and notes he used to do his work with.The

> circuits he used to drive the tube with reminds me an an old ham

> tranmiter with an old audio generator driving it with.He used

around

> 11 megaherze to drive the light tube with,with around a 100 watts

of

> radio signal drive.One night some years back I had a dream about

his

> work and a circuit came to mind just what to build that would

reflect

> his work the closest i could make it.Alot of these units claoming

to

> be a real rife is not it at all the best i can tell,I am an

> electronic engineer and knoiw the differance to what he did verses

> what is out there.Now things have advanced quite abit in

electronics

> since his day.Solid state devices can do so much more today.So the

> following morning I awoke and went to the lab where i worked and i

> breadboarded the circuit i saw in my dreams,and it worked perfect

> right out of the gate.He used a sine wave imposed on a radio wave

to

> drive the light tube.I see square wave devices being used,square

and

> sine are very different in nature,square produces many harmonics.In

> his day the light was put close to the body where the problem

> was.Nowadays we have an edge on deliveying the energy field to the

> entire body all at once.A compound called ferrite holds the answer

to

> doing this.Picture this if you an mri tunnel.Let's suppose we build

a

> table where a ferrite loop surrouds the body and moves slowly the

> leanth of the body on a worm gear.This loop is actaully an antenna

> with wire wrapped around the ferrite loop tuned to 11

megaherze.This

> is driven with a radio frequency power amplier being modulated with

a

> pure sine wave.Within the ferrite loop perfect radio fields are

given

> to a person being totally engulfed within the field,all tissues

would

> be treated in this manor.The power has to be controlled as the loop

> reahes the head of a person,it tripps a micro switch and cuts down

> the power in the field.I have built the equipment on my own

> time,using the goverments equipoment to check out how well the

signal

> is being generated.I have been after to do the work he once

did,ther

> is alot oalot of fake machines out there,and the people do not get

> healed on them, i am not saying all machines are fake but i bet

most

> are making very large claims....cary

>

August 15, 2008