Guest guest Posted May 22, 2008 Report Share Posted May 22, 2008 Hi , I'm slowly getting my PLC web site updated. I hope to make an announcement here soon and in my FreX group. Yes, the audio gating frequency is what comes out of the function generator, like the FreX programs which are the CALF programs and other frequency sets that generous researchers have made available to the public over the years for further experimentation and research into this most remarkable therapy. The flyback high voltage transformer has a nice range between 30kHz and 60kHz as its sweep spot. For our purposes, operating the RF as high as it will go is of good benefit as it puts more signal pressure in the audio signal (Jim calls this the envelope). These cheap Chinese plasma systems do have slight variations, so we needed to make the RF variable so people can " tune-in " the optimum performance, or there is the choice of setting the RF up around 100kHz, it will still output this carrier frequency, but at reduce levels as we have moved away from the flybacks sweet spot. I see the Novelty Plasma Lamp operated via the PLC as a introduction to the B/R machine (they both sing, like Dr Rife's machine did). You do get good therapeutic value from the Novelty Balls, so people can easily imagine what to expect when they move up to the B/R instrument, which is a very serious RF plasma system designed to tackle all micro invades our pets can experience. Sincerely. Ken Uzzell martin7730 wrote: > Hi Ken, > > I just looked at your PLC on your website. Is the gating frequency set > to the proper MOR frequency of the pathogen you would want to get rid > of? The RF frequency would then be the energy that contacts your body > that the gating frequency rides on. > > > > > - > -- Ken Uzzell http://heal-me.com.au Quote Link to comment Share on other sites More sharing options...
Guest guest Posted May 22, 2008 Report Share Posted May 22, 2008 Ken, I modified my 8 " plasma globe to accept a modulation or gating signal. The internal fly back still runs at its normal frequency. I haven't really used it, only ounce for 15 minutes. If it is as effective as you say, I will have to put it to work more. What I need is to run some kind of energy boosting frequencies. > > Hi Ken, > > > > I just looked at your PLC on your website. Is the gating frequency set > > to the proper MOR frequency of the pathogen you would want to get rid > > of? The RF frequency would then be the energy that contacts your body > > that the gating frequency rides on. > > > > > > > > > > - > > > > -- > Ken Uzzell > http://heal-me.com.au > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted May 24, 2008 Report Share Posted May 24, 2008 Hi , When you perform the original modification on the plasma balls, attaching the audio lead to the power transistor base pin, I am told we get a modulation via interruption. On the scope this look pretty okay when measuring the pulsed E field that is transmitted from the ball. If attaching a frequency counter to the circuit, or with some you can just hang the probe in the air a foot away from the ball, and you will probably see just the 28kHz, as the frequency counter will have issues with the audio signal. I figured the frequency counter was registering on the higher frequency, which is the 28kHz, not the audio. A 5% modulation envelop means that with a 28kHz carrier, the highest we can go and be effective is 5.6kHz audio, according to Jim's instructions. This is pretty good as most of the CAFL frequencies are way below this. One experimenter on the Rife Construction group just ran the 28kHz without any modulation and had his nasal polyps de-attached over night, and were expelled the next morning. This makes sense as an electrostatic signal will travel very well over the entire outer body and not have difficulty in existing in the mouth and nasal passageways. He saved himself a few thousands dollars on an operation :-) Performing the original modification did see a large charge on the ground/shield connection, which attached to the sound card, which as I view things, was not desirable, however, I had only heard of two sound cards that were destroyed from this set-up, one chap in the USA and another therapist in South Africa. I believe this signal comes from the plasma ball, as it is looking for an Earth, and used the shield cable back to the computer headphone/audio out connector. The PLC circuit prevents this from happening, so we get a very clean gating and RF operation. Sincerely, Ken Uzzell http://heal-me.com.au martin7730 wrote: > Ken, > > I modified my 8 " plasma globe to accept a modulation or gating signal. > The internal fly back still runs at its normal frequency. I haven't > really used it, only ounce for 15 minutes. If it is as effective as > you say, I will have to put it to work more. What I need is to run > some kind of energy boosting frequencies. > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted May 29, 2008 Report Share Posted May 29, 2008 Hi, Changing amplitude is the ripple in High Voltage (HV or EHT) generated by flyback. 1. Ripple frequency will surely be 28KHz., or whatever the flayback oscillator frequency is. 2. Ripple wave form will depend on charge discharge characteristics of globe electrode capacitance. 3. Ripple frequency won't be pure sine/square/ramp. It will be as said in point #2 above. It is desirable to try & see exciting plasma ball with RF without flyback. Due to high electrode capacitance (Major drawback of plasma globe), RF seems doubtful. Low electrode capacitance tubes are best suited for frqency therapy. ===================================== wrote: > Hi Ken, > > I heard much controversy over what is AC and DC. I think it all boils down to your reference point but I've been wrong before. I consider the output of the Plasma tube as AC because of the changing amplitude. The changing amplitude is what the bodies cells are affected by. I am going to try to excite the Plasma Ball with RF to begin with, without the fly back. > > > > Re: PLC >> >> Hi, >> Plasma ball inner surface has a conductive coating, & is a high >> capacitance electrode, & it is a dc plasma device. >> 28 Khz. flyback switching or PLC signals do something inside only, >> & doesn't reach plasma or available as output plasma. >> Being a dc plasma device, is it suitable for frequency therapy? >> I doubt. >> Pls let me know yr views. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted May 30, 2008 Report Share Posted May 30, 2008 If you are running an EM machine the plasma ball circuit isn't needed. After burning up a few plasma ball circuits trying to run plasma balls directly from computer, I built an EM and run my own wire into the steel wool at top of ball. The balls transmit accurate freq even if they don't light. No carrier needed. To get full benefit sit close and have feet on ground plate. --------- Re: PLC > > Hi, > The 28KHz. is ramp like waveform to get the flyback action. > The HV generated during flyback is stored & smoothened by the large > electrode capacitance of plasma globe. > What looks like sinewave may be the RIPPLE in HV. > HV ripple may have relation with flyback frequency & load discharge > characteristics. > The tiny spark between the finger & glass globe is the dielectric > breakdown of air. > It is like lightning in the nature, DIELECTRIC BREAKDOWN OF AIR. > May not be external capacitive coupling with air around it, or has any > ac nature other than ripple. > These are my views only, which often meet intense opposition. > MM Recent Activity 6New Members Visit Your Group Meditation and Lovingkindness A Yahoo! Group to share and learn. Yahoo! Health Healthy Aging Improve your quality of life. Drive Traffic Sponsored Search can help increase your site traffic.. Quote Link to comment Share on other sites More sharing options...
Guest guest Posted May 31, 2008 Report Share Posted May 31, 2008 Hi, This seems to be the antenna effect, exploiting the conductive coating of globe. It is a spherical antenna. If there is no discharge, there is no plasma, though unit is plasma ball. Plasma essentially is associated with discharge. Will be helpful if you can tell What voltage is the wire at when " run my own wire into the steel wool at top of ball. " If there is EM machine, plasma ball isn't needed. Yep. ======================================= chbz@... wrote: > If you are running an EM machine the plasma ball circuit isn't needed. > > After burning up a few plasma ball circuits trying to run plasma balls > directly from computer, I built an EM and run my own wire into the > steel wool at top of ball. > > The balls transmit accurate freq even if they don't light. No carrier > needed. To get full benefit sit close and have feet on ground plate. > > > --------- Re: PLC >> >> Hi, >> The 28KHz. is ramp like waveform to get the flyback action. >> The HV generated during flyback is stored & smoothened by the large >> electrode capacitance of plasma globe. >> What looks like sinewave may be the RIPPLE in HV. >> HV ripple may have relation with flyback frequency & load discharge >> characteristics. >> The tiny spark between the finger & glass globe is the dielectric >> breakdown of air. >> It is like lightning in the nature, DIELECTRIC BREAKDOWN OF AIR. >> May not be external capacitive coupling with air around it, or has any >> ac nature other than ripple. >> These are my views only, which often meet intense opposition. >> MM Quote Link to comment Share on other sites More sharing options...
Guest guest Posted May 31, 2008 Report Share Posted May 31, 2008 Hi Gesi Join http://groups.yahoo.com/group/BeckRife-ColloidalSilver_Users/join and download the modified EM7MOD and modify two plasma lamps as per the instructions there electronics in the lamps is not used.. You will find it to be one of the most effective machines you will ever see..I have used them for years with amazing success..The lamps are used in the contact mode..You can use Ken's frex 16 with a sine to square generator or use a square wave generator such as the atelier robin f100 series. The plasma lamps transfer accurate frequencys very well and are inexpensive. I have many documented cases verified by cat scans and the medical system The unit is an antiparallel system Best regards Alvin R Re: PLC >>> >>> Hi, >>> The 28KHz. is ramp like waveform to get the flyback action. >>> The HV generated during flyback is stored & smoothened by the large >>> electrode capacitance of plasma globe. >>> What looks like sinewave may be the RIPPLE in HV. >>> HV ripple may have relation with flyback frequency & load discharge >>> characteristics. >>> The tiny spark between the finger & glass globe is the dielectric >>> breakdown of air. >>> It is like lightning in the nature, DIELECTRIC BREAKDOWN OF AIR. >>> May not be external capacitive coupling with air around it, or has any >>> ac nature other than ripple. >>> These are my views only, which often meet intense opposition. >>> MM > > > ------------------------------------ > > Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.