Guest guest Posted March 23, 2012 Report Share Posted March 23, 2012 Hi Jesus is Lord , From what I understand ozone killson contact but it will not penetrate so it will no towrk inside . I personnaly would get rid of the furniture . MMS I did it for the car bu tthey say wee need to do it then ev ery 2 weeks . the htief oil had good resutls according to some post penetrating better over time someone got rid of mold like this I tryed it works well still I need to do it for a while before it is definitive at the Tampa conference I met a compagny wha has a product that kills everyhting for good including mold for 2 years i tis steril for 2 years . I got 2 bottle did not use it yet I just had a try on a peice of paper on the table as a curiosity . I tmight be working as I had a herx of my joint the same day on the hand that did it even thought I did it just for a minute I did not take any plastic gloves it wetn throught my skin killing bugs obviously here is the website better health technology.comth enam eof the product is vital shield Kindly marie To: Lyme_and_Rife Sent: Wednesday, March 21, 2012 11:41 PMSubject: OT: mold Dear Lyme and Rife yahoo group: I am wondering if any of the MMS protocols will treat furniture and/or clothing that has any kind of mold in it? I have tried treating some unfinished solid maple wood furniture with 3% hydrogen peroxide (the kind typically found in a drug store/pharmacy) and also with white vinegar. All I did, though, was spray the furniture on all sides and let it air out in a closed-off room (some of the time which had the ceiling fan going). I did not wipe off the moisture; I only sprayed it and let it air dry. I did it at first with a mask over my face. After the first day of airing out, I went in to spray some of the sides that I could not get on the furniture. However, I did not put the mask over my face. I had a reaction. So, I know I should use a mask always. After a couple of days in-full of airing out after treatment, the smell did seem less intense. But, one of the drawers still seemed to smell that musty smell. I therefore did not want to put my recently washed clothing back into the drawers. Does anyone know if the MMS1 sprayed on untreated wood that has any kind of mold on it will clear up the mold in it in full? Also, how should one treat any clothing that was in the moldy drawers (i.e., putting the MMS1 in the wash load)? Finally, how does one know if the mold has been fully resolved in the furniture and clothing or not? If one does have to discard the items, how should one properly dispose of it and not harm anyone else nor the environment? A reply would be appreciated. Thank you. In Christ Jesus the Lord, Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 24, 2012 Report Share Posted March 24, 2012 HiDr K mentions a product now availabe for mold. Its produced in Italy, i don t know the name of it though.Damarise , a spray.To: Lyme_and_Rife From: phoenix4grace@...Date: Thu, 22 Mar 2012 19:18:53 -0700Subject: Re: OT: mold Hi Jesus is Lord , From what I understand ozone killson contact but it will not penetrate so it will no towrk inside . I personnaly would get rid of the furniture . MMS I did it for the car bu tthey say wee need to do it then ev ery 2 weeks . the htief oil had good resutls according to some post penetrating better over time someone got rid of mold like this I tryed it works well still I need to do it for a while before it is definitive at the Tampa conference I met a compagny wha has a product that kills everyhting for good including mold for 2 years i tis steril for 2 years . I got 2 bottle did not use it yet I just had a try on a peice of paper on the table as a curiosity . I tmight be working as I had a herx of my joint the same day on the hand that did it even thought I did it just for a minute I did not take any plastic gloves it wetn throught my skin killing bugs obviously here is the website better health technology.comth enam eof the product is vital shield Kindly marie To: Lyme_and_Rife Sent: Wednesday, March 21, 2012 11:41 PMSubject: OT: mold Dear Lyme and Rife yahoo group: I am wondering if any of the MMS protocols will treat furniture and/or clothing that has any kind of mold in it? I have tried treating some unfinished solid maple wood furniture with 3% hydrogen peroxide (the kind typically found in a drug store/pharmacy) and also with white vinegar. All I did, though, was spray the furniture on all sides and let it air out in a closed-off room (some of the time which had the ceiling fan going). I did not wipe off the moisture; I only sprayed it and let it air dry. I did it at first with a mask over my face. After the first day of airing out, I went in to spray some of the sides that I could not get on the furniture. However, I did not put the mask over my face. I had a reaction. So, I know I should use a mask always. After a couple of days in-full of airing out after treatment, the smell did seem less intense. But, one of the drawers still seemed to smell that musty smell. I therefore did not want to put my recently washed clothing back into the drawers. Does anyone know if the MMS1 sprayed on untreated wood that has any kind of mold on it will clear up the mold in it in full? Also, how should one treat any clothing that was in the moldy drawers (i.e., putting the MMS1 in the wash load)? Finally, how does one know if the mold has been fully resolved in the furniture and clothing or not? If one does have to discard the items, how should one properly dispose of it and not harm anyone else nor the environment? A reply would be appreciated. Thank you. In Christ Jesus the Lord, Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 24, 2012 Report Share Posted March 24, 2012 Hi Damarise, Does ADH or VIP spray sound familiar? I may go to see Dr. Klinghart in June and I will ask him about the spray from Italy. See below: Dr. Dietrich Klinghardt - Mold * Americans have an unusual building situation. We have wood-framed structures with a plastic bag wrapped around it. This is the perfect environment for breeding mold. In fact, this is essentially what they do in mold labs to create more mold. We create homes like a mold-growing culture setup. * When two mold cultures were separated in a research experiment and one was exposed to EMF while the other was not, the one exposed to EMF had 600 times more toxic biotoxins and its growth rate was dozens of times faster. * It may be the case that EMF itself may not harm our body's cells, but it may impact the microbes within us which results in more biotoxins. * Molds create biotoxins (mycotoxins) to defend themselves. * Most patients have Aspergillus. * Myrrh may be helpful in raising MSH when used in a diffuser. * People with mold issues often have a negative reaction to DMSA; though this can also be related to sulfa. * Actos turns on PPAR gamma receptor. Each cell has similar organs to our body; a liver for detox for example. The more peroxisomes the better. Actos turns on receptors that signal to more peroxisomes which makes the cell detoxify better. Chlorella does this better than Actos. * Chlorella does what Cholestyramine does, but better. God put Actos and Cholestyramine together in one substance called chlorella. High dose of chlorella is better than low dose. Low doses tend to mobilize more than they bind. Higher doses bind more than they mobilize. 20 tablets three times a day 30 minutes before a meal. * Fish oil in high doses turns on PPAR gamma receptor. Chlorella + Fish oil can be a very powerful combination. * Even mold exposure in a short car ride is enough to re-trigger the negative cycle. * Dr. Shoemaker is a " genius " . * TGF-b1 leads to remodeling of the blood vessels. It can lead to a fibrotic lung. * The intelligence of normal bacteria to that of mold is like that of a cabbage to an elephant. Molds are far more critical than bacteria. Parasites are elephants squared. * Molds incorporate heavy metals to protect themselves from white blood cells. The white blood cells are killed by mercury, but the molds are not. * MSH is a hypothalamic peptide which is involved in cytokine release. Low levels are associated to mold, MARCoNS (staph), EMF, and Lyme. * MSH may be increased with inhalation of Myrrh oil using a diffuser (not a nebulizer). It may give back energy. Dramatically raises MSH. Forget ATP, CoQ10, glutathione, etc. Bring up MSH and you see a miracle. Tincture of myrrh is a good antimicrobial as well. * ADH is involved in the reabsorption of water. With chronic Lyme or mold, the pituitary is affected and the body may not make enough ADH. When you stand up and lack ADH, the kidneys may physically slip downward. When people get lots of electric shocks when touching things, this may be an indicator that ADH is low. There is an RX ADH nasal spray available. 1 liter of water mixed with 2-3 tablespoons of Matrix Electrolytes, 1 capful of M-Water, and 2 tablespoons of Matrix Minerals can help here. Neural therapy may be used. Reducing EMFs and getting restorative sleep is critical. * VIP regulates blood flow and inflammatory response. When shaking hands with someone and putting your other hand behind their neck, if both are cold, this may represent thyroid issues. If the hands are cold and the neck is warm, this may represent a microcirculation issue or a lack of VIP. Post exercise fatigue may be a lack of VIP. When colors look funny or floaters in the eyes are present, this may be another indicator towards low VIP. There is a nasal VIP spray that can be used to address low VIP using 1 spray 4 times per day in each nostril. Before going this route, one must address mold at home and in the work environment. Sinus flush, removal of amalgams, neural therapy, auto-urine therapy, EMF reduction, and sleep restoration are important here. When VIP is low, it is difficult to mediate, pray, or connect with the Divine. * MMP-9 will be normal once a patient has gone through treatment. It is zinc dependent. MMP-9 is a mechanism that is used by the bugs to " mush you up so that they can drink you rather than eat you " . If someone is given zinc when MMP-9 is already elevated, the tissue breakdown will be even worse. High MMP-9 rapidly ages patients. Consider interference fields such as scars, teeth, root canals, sinus infections. Reduce EMFs. Nanoized Curcumin with pepper at 350mg twice a day may help. Life Enhancement has a good option here. An important note here is that if MMP-9 is elevated, KPU treatment with zinc may make matters worse. Ensure MMP-9 is normalized before adding zinc. * Liposomal Alpha Lipoic Acid may be useful for mycotoxins. Making it liposomal will increase absorption before it gets to the gut where the bugs will use it for protection. 2 dropperfuls three times a day. BioPure carries a liposomal ALA here. > > > Hi > Dr K mentions a product now availabe for mold. Its produced in Italy, i don t know the name of it though. > Damarise , a spray. > > To: Lyme_and_Rife > From: phoenix4grace@... > Date: Thu, 22 Mar 2012 19:18:53 -0700 > Subject: Re: OT: mold > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Jesus is Lord , > From what I understand ozone killson contact but it will not penetrate so it will no towrk inside . > I personnaly would get rid of the furniture . > MMS I did it for the car bu tthey say wee need to do it then ev ery 2 weeks . the htief oil had good resutls according to some post penetrating better over time someone got rid of mold like this I tryed it works well still I need to do it for a while before it is definitive at the Tampa conference I met a compagny wha has a product that kills everyhting for good including mold for 2 years i tis steril for 2 years . I got 2 bottle did not use it yet > I just had a try on a peice of paper on the table as a curiosity . I tmight be working as I had a herx of my joint the same day on the hand that did it even thought I did it just for a minute I did not take any plastic gloves > it wetn throught my skin killing bugs obviously > here is the website better health technology.comth enam eof the product is vital shield > > Kindly marie > > > > > > > To: Lyme_and_Rife > Sent: Wednesday, March 21, 2012 11:41 PM > Subject: OT: mold > > > > > > > Dear Lyme and Rife yahoo group: > I am wondering if any of the MMS protocols will treat furniture and/or clothing that has any kind of mold in it? I have tried treating some unfinished solid maple wood furniture with 3% hydrogen peroxide (the kind typically found in a drug store/pharmacy) and also with white vinegar. All I did, though, was spray the furniture on all sides and let it air out in a closed-off room (some of the time which had the ceiling fan going). I did not wipe off the moisture; I only sprayed it and let it air dry. I did it at first with a mask over my face. After the first day of airing out, I went in to spray some of the sides that I could not get on the furniture. However, I did not put the mask over my face. I had a reaction. So, I know I should use a mask always. After a couple of days in-full of airing out after treatment, the smell did seem less intense. But, one of the drawers > still seemed to smell that musty smell. I therefore did not want to put my recently washed clothing back into the drawers. > Does anyone know if the MMS1 sprayed on untreated wood that has any kind of mold on it will clear up the mold in it in full? Also, how should one treat any clothing that was in the moldy drawers (i.e., putting the MMS1 in the wash load)? Finally, how does one know if the mold has been fully resolved in the furniture and clothing or not? If one does have to discard the items, how should one properly dispose of it and not harm anyone else nor the environment? > A reply would be appreciated. > Thank > you. > In Christ Jesus the > Lord, > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 26, 2012 Report Share Posted March 26, 2012 HiThanks for the article, its intresting, This docter seems intresting and very knowledgabe. Unfortunately there are too few of docters like him. DamariseTo: Lyme_and_Rife From: sueblanton@...Date: Sat, 24 Mar 2012 03:36:10 +0000Subject: Re: OT: mold Hi Damarise, Does ADH or VIP spray sound familiar? I may go to see Dr. Klinghart in June and I will ask him about the spray from Italy. See below: Dr. Dietrich Klinghardt - Mold * Americans have an unusual building situation. We have wood-framed structures with a plastic bag wrapped around it. This is the perfect environment for breeding mold. In fact, this is essentially what they do in mold labs to create more mold. We create homes like a mold-growing culture setup. * When two mold cultures were separated in a research experiment and one was exposed to EMF while the other was not, the one exposed to EMF had 600 times more toxic biotoxins and its growth rate was dozens of times faster. * It may be the case that EMF itself may not harm our body's cells, but it may impact the microbes within us which results in more biotoxins. * Molds create biotoxins (mycotoxins) to defend themselves. * Most patients have Aspergillus. * Myrrh may be helpful in raising MSH when used in a diffuser. * People with mold issues often have a negative reaction to DMSA; though this can also be related to sulfa. * Actos turns on PPAR gamma receptor. Each cell has similar organs to our body; a liver for detox for example. The more peroxisomes the better. Actos turns on receptors that signal to more peroxisomes which makes the cell detoxify better. Chlorella does this better than Actos. * Chlorella does what Cholestyramine does, but better. God put Actos and Cholestyramine together in one substance called chlorella. High dose of chlorella is better than low dose. Low doses tend to mobilize more than they bind. Higher doses bind more than they mobilize. 20 tablets three times a day 30 minutes before a meal. * Fish oil in high doses turns on PPAR gamma receptor. Chlorella + Fish oil can be a very powerful combination. * Even mold exposure in a short car ride is enough to re-trigger the negative cycle. * Dr. Shoemaker is a "genius". * TGF-b1 leads to remodeling of the blood vessels. It can lead to a fibrotic lung. * The intelligence of normal bacteria to that of mold is like that of a cabbage to an elephant. Molds are far more critical than bacteria. Parasites are elephants squared. * Molds incorporate heavy metals to protect themselves from white blood cells. The white blood cells are killed by mercury, but the molds are not. * MSH is a hypothalamic peptide which is involved in cytokine release. Low levels are associated to mold, MARCoNS (staph), EMF, and Lyme. * MSH may be increased with inhalation of Myrrh oil using a diffuser (not a nebulizer). It may give back energy. Dramatically raises MSH. Forget ATP, CoQ10, glutathione, etc. Bring up MSH and you see a miracle. Tincture of myrrh is a good antimicrobial as well. * ADH is involved in the reabsorption of water. With chronic Lyme or mold, the pituitary is affected and the body may not make enough ADH. When you stand up and lack ADH, the kidneys may physically slip downward. When people get lots of electric shocks when touching things, this may be an indicator that ADH is low. There is an RX ADH nasal spray available. 1 liter of water mixed with 2-3 tablespoons of Matrix Electrolytes, 1 capful of M-Water, and 2 tablespoons of Matrix Minerals can help here. Neural therapy may be used. Reducing EMFs and getting restorative sleep is critical. * VIP regulates blood flow and inflammatory response. When shaking hands with someone and putting your other hand behind their neck, if both are cold, this may represent thyroid issues. If the hands are cold and the neck is warm, this may represent a microcirculation issue or a lack of VIP. Post exercise fatigue may be a lack of VIP. When colors look funny or floaters in the eyes are present, this may be another indicator towards low VIP. There is a nasal VIP spray that can be used to address low VIP using 1 spray 4 times per day in each nostril. Before going this route, one must address mold at home and in the work environment. Sinus flush, removal of amalgams, neural therapy, auto-urine therapy, EMF reduction, and sleep restoration are important here. When VIP is low, it is difficult to mediate, pray, or connect with the Divine. * MMP-9 will be normal once a patient has gone through treatment. It is zinc dependent. MMP-9 is a mechanism that is used by the bugs to "mush you up so that they can drink you rather than eat you". If someone is given zinc when MMP-9 is already elevated, the tissue breakdown will be even worse. High MMP-9 rapidly ages patients. Consider interference fields such as scars, teeth, root canals, sinus infections. Reduce EMFs. Nanoized Curcumin with pepper at 350mg twice a day may help. Life Enhancement has a good option here. An important note here is that if MMP-9 is elevated, KPU treatment with zinc may make matters worse. Ensure MMP-9 is normalized before adding zinc. * Liposomal Alpha Lipoic Acid may be useful for mycotoxins. Making it liposomal will increase absorption before it gets to the gut where the bugs will use it for protection. 2 dropperfuls three times a day. BioPure carries a liposomal ALA here. > > > Hi > Dr K mentions a product now availabe for mold. Its produced in Italy, i don t know the name of it though. > Damarise , a spray. > > To: Lyme_and_Rife > From: phoenix4grace@... > Date: Thu, 22 Mar 2012 19:18:53 -0700 > Subject: Re: OT: mold > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hi Jesus is Lord , > From what I understand ozone killson contact but it will not penetrate so it will no towrk inside . > I personnaly would get rid of the furniture . > MMS I did it for the car bu tthey say wee need to do it then ev ery 2 weeks . the htief oil had good resutls according to some post penetrating better over time someone got rid of mold like this I tryed it works well still I need to do it for a while before it is definitive at the Tampa conference I met a compagny wha has a product that kills everyhting for good including mold for 2 years i tis steril for 2 years . I got 2 bottle did not use it yet > I just had a try on a peice of paper on the table as a curiosity . I tmight be working as I had a herx of my joint the same day on the hand that did it even thought I did it just for a minute I did not take any plastic gloves > it wetn throught my skin killing bugs obviously > here is the website better health technology.comth enam eof the product is vital shield > > Kindly marie > > > > > > > To: Lyme_and_Rife > Sent: Wednesday, March 21, 2012 11:41 PM > Subject: OT: mold > > > > > > > Dear Lyme and Rife yahoo group: > I am wondering if any of the MMS protocols will treat furniture and/or clothing that has any kind of mold in it? I have tried treating some unfinished solid maple wood furniture with 3% hydrogen peroxide (the kind typically found in a drug store/pharmacy) and also with white vinegar. All I did, though, was spray the furniture on all sides and let it air out in a closed-off room (some of the time which had the ceiling fan going). I did not wipe off the moisture; I only sprayed it and let it air dry. I did it at first with a mask over my face. After the first day of airing out, I went in to spray some of the sides that I could not get on the furniture. However, I did not put the mask over my face. I had a reaction. So, I know I should use a mask always. After a couple of days in-full of airing out after treatment, the smell did seem less intense. But, one of the drawers > still seemed to smell that musty smell. I therefore did not want to put my recently washed clothing back into the drawers. > Does anyone know if the MMS1 sprayed on untreated wood that has any kind of mold on it will clear up the mold in it in full? Also, how should one treat any clothing that was in the moldy drawers (i.e., putting the MMS1 in the wash load)? Finally, how does one know if the mold has been fully resolved in the furniture and clothing or not? If one does have to discard the items, how should one properly dispose of it and not harm anyone else nor the environment? > A reply would be appreciated. > Thank > you. > In Christ Jesus the > Lord, > > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 27, 2012 Report Share Posted March 27, 2012 DEar , The thief oil vaporised with a cold sonic vaporiseer works pretty well for us. The book mold warrior by dct Shoemakermay be a good idea to read to see what is th ebest way to do for you . Kindly Marie To: Lyme_and_Rife Sent: Monday, March 26, 2012 8:40 PMSubject: Re: OT: mold Dear ,I WISH I could tell you that you could get the mold out of everything inyour possession. It is impossible. Mold spores are microscopic andmultiply rapidly. Not to mention all of the mycotoxins that they secretinto their environment. Those mycotoxins are fat soluble...meaningoily. I personally am very very sensitive to mold toxins. Whenexposed to even the smallest level on someones clothing, my joints willhurt and my muscles will begin to burn and tighten. The level of molddictates how severely I react. I have some clothes that I bought brandnew, wore them around "moldy" family members and then came home andwashed them. I still react to these clothes when I wear them. Can'tafford to buy a new wardrobe everytime I visit family so i save these ina container until I go visit them again. We tried to save a few thingsfrom our mold ridden house (it was mostly in the crawlspace). When webrought them to our new environment, clothing included, after washingseveral times we were still reacting to them.Read a blog written by a physician with mold sensitivities who wrotethat he ended up buying and selling 3 different houses and sets of carsbecause he "cross contaminated" them with the stuff he tried to washfrom his mold house and take to the new environment. We did not want tolive like this and continue to move and get rid of more stuff. So wejust got rid of everything and started over. Yes it cost us, but at acertain point there is no amount of money that will buy back yourhealth. It is too important to cut corners.This is tough info to swallow. It was very hard to get rid of my babiesvideos, scrap books and pictures. But i am in better health today thanI would have been otherwise. Besides, you can't take it to heaven withyou anyway.Just thought you might want to know.In Christ,CherieI can do all things in Christ who gives me strength. Phil 4:13> >>> > From: jesusislord887 steppingstone3@>> > To: Lyme_and_Rife >> > Sent: Wednesday, March 21, 2012 11:41 PM>> > Subject: OT: mold>> >>> >>> >>> >>> >>> >>> > Dear Lyme and Rife yahoo group:>> > I am wondering if any of the MMS protocols will treat furnitureand/or clothing that has any kind of mold in it? I have tried treatingsome unfinished solid maple wood furniture with 3% hydrogen peroxide(the kind typically found in a drug store/pharmacy) and also with whitevinegar. All I did, though, was spray the furniture on all sides and letit air out in a closed-off room (some of the time which had the ceilingfan going). I did not wipe off the moisture; I only sprayed it and letit air dry. I did it at first with a mask over my face. After the firstday of airing out, I went in to spray some of the sides that I could notget on the furniture. However, I did not put the mask over my face. Ihad a reaction. So, I know I should use a mask always. After a couple ofdays in-full of airing out after treatment, the smell did seem lessintense. But, one of the drawers>> > still seemed to smell that musty smell. I therefore did not want toput my recently washed clothing back into the drawers.>> > Does anyone know if the MMS1 sprayed on untreated wood that hasany kind of mold on it will clear up the mold in it in full? Also, howshould one treat any clothing that was in the moldy drawers (i.e.,putting the MMS1 in the wash load)? Finally, how does one know if themold has been fully resolved in the furniture and clothing or not? Ifone does have to discard the items, how should one properly dispose ofit and not harm anyone else nor the environment?>> > A reply would be appreciated.>> > Thank>> > you.>> >In Christ Jesus the>> > Lord,>> >>> >> Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 28, 2012 Report Share Posted March 28, 2012 Hi ,I second what Marie says. I tried several treatments of MMS in our RV and it helped, but only briefly. After 48hrs using a Young Living Cold Diffuser and Dr. Loyd's Detox oil, which is basically the same thing as Thieves' but a bit less expensive, we finally got rid of all traces of whatever mold was recurring. Since we've been on the road, with all sor6ts of weather: hot, cold, humid, sometimes with heavy condensation conditions, the rig is STILL free of the mold. The Detox/Thieves' got into every nook and cranny: even into the fabric elements of the RV. I brought the apparatus along, thinking we might need to treat again, but it's been fine since mid-November.Be well,Léna DEar , The thief oil vaporised with a cold sonic vaporiseer works pretty well for us. The book mold warrior by dct Shoemakermay be a good idea to read to see what is th ebest way to do for you . Kindly Marie To: Lyme_and_Rife Sent: Monday, March 26, 2012 8:40 PMSubject: Re: OT: mold Dear ,I WISH I could tell you that you could get the mold out of everything inyour possession. It is impossible. Mold spores are microscopic andmultiply rapidly. Not to mention all of the mycotoxins that they secretinto their environment. Those mycotoxins are fat soluble...meaningoily. I personally am very very sensitive to mold toxins. Whenexposed to even the smallest level on someones clothing, my joints willhurt and my muscles will begin to burn and tighten. The level of molddictates how severely I react. I have some clothes that I bought brandnew, wore them around "moldy" family members and then came home andwashed them. I still react to these clothes when I wear them. Can'tafford to buy a new wardrobe everytime I visit family so i save these ina container until I go visit them again. We tried to save a few thingsfrom our mold ridden house (it was mostly in the crawlspace). When webrought them to our new environment, clothing included, after washingseveral times we were still reacting to them.Read a blog written by a physician with mold sensitivities who wrotethat he ended up buying and selling 3 different houses and sets of carsbecause he "cross contaminated" them with the stuff he tried to washfrom his mold house and take to the new environment. We did not want tolive like this and continue to move and get rid of more stuff. So wejust got rid of everything and started over. Yes it cost us, but at acertain point there is no amount of money that will buy back yourhealth. It is too important to cut corners.This is tough info to swallow. It was very hard to get rid of my babiesvideos, scrap books and pictures. But i am in better health today thanI would have been otherwise. Besides, you can't take it to heaven withyou anyway.Just thought you might want to know.In Christ,CherieI can do all things in Christ who gives me strength. Phil 4:13> >>> > From: jesusislord887 steppingstone3@>> > To: Lyme_and_Rife >> > Sent: Wednesday, March 21, 2012 11:41 PM>> > Subject: OT: mold>> >>> >>> >>> >>> >>> >>> > Dear Lyme and Rife yahoo group:>> > I am wondering if any of the MMS protocols will treat furnitureand/or clothing that has any kind of mold in it? I have tried treatingsome unfinished solid maple wood furniture with 3% hydrogen peroxide(the kind typically found in a drug store/pharmacy) and also with whitevinegar. All I did, though, was spray the furniture on all sides and letit air out in a closed-off room (some of the time which had the ceilingfan going). I did not wipe off the moisture; I only sprayed it and letit air dry. I did it at first with a mask over my face. After the firstday of airing out, I went in to spray some of the sides that I could notget on the furniture. However, I did not put the mask over my face. Ihad a reaction. So, I know I should use a mask always. After a couple ofdays in-full of airing out after treatment, the smell did seem lessintense. But, one of the drawers>> > still seemed to smell that musty smell. I therefore did not want toput my recently washed clothing back into the drawers.>> > Does anyone know if the MMS1 sprayed on untreated wood that hasany kind of mold on it will clear up the mold in it in full? Also, howshould one treat any clothing that was in the moldy drawers (i.e.,putting the MMS1 in the wash load)? Finally, how does one know if themold has been fully resolved in the furniture and clothing or not? Ifone does have to discard the items, how should one properly dispose ofit and not harm anyone else nor the environment?>> > A reply would be appreciated.>> > Thank>> > you.>> >In Christ Jesus the>> > Lord,>> >>> >> Quote Link to comment Share on other sites More sharing options...
Guest guest Posted March 29, 2012 Report Share Posted March 29, 2012 Hi, Lena, I use Dr. Loyd's detox oil and also his diffuser. The diffuser works for a while then oils seems stucks and not working at all. Does your Young Living Cold Diffuser has this kind of problem? Or something wrong with his detox oil? Helen > > > DEar , > The thief oil vaporised with a cold sonic vaporiseer works pretty well > for us. The book mold warrior by dct Shoemakermay be a good idea to > read to see what is th ebest way to do for you . > Kindly Marie > > > > To: Lyme_and_Rife > Sent: Monday, March 26, 2012 8:40 PM > Subject: Re: OT: mold > > > Dear , > I WISH I could tell you that you could get the mold out of everything in > your possession. It is impossible. Mold spores are microscopic and > multiply rapidly. Not to mention all of the mycotoxins that they secret > into their environment. Those mycotoxins are fat soluble...meaning > oily. I personally am very very sensitive to mold toxins. When > exposed to even the smallest level on someones clothing, my joints will > hurt and my muscles will begin to burn and tighten. The level of mold > dictates how severely I react. I have some clothes that I bought brand > new, wore them around " moldy " family members and then came home and > washed them. I still react to these clothes when I wear them. Can't > afford to buy a new wardrobe everytime I visit family so i save these in > a container until I go visit them again. We tried to save a few things > from our mold ridden house (it was mostly in the crawlspace). When we > brought them to our new environment, clothing included, after washing > several times we were still reacting to them. > > Read a blog written by a physician with mold sensitivities who wrote > that he ended up buying and selling 3 different houses and sets of cars > because he " cross contaminated " them with the stuff he tried to wash > from his mold house and take to the new environment. We did not want to > live like this and continue to move and get rid of more stuff. So we > just got rid of everything and started over. Yes it cost us, but at a > certain point there is no amount of money that will buy back your > health. It is too important to cut corners. > > This is tough info to swallow. It was very hard to get rid of my babies > videos, scrap books and pictures. But i am in better health today than > I would have been otherwise. Besides, you can't take it to heaven with > you anyway. > > Just thought you might want to know. > > In Christ, > > Cherie > I can do all things in Christ who gives me strength. Phil 4:13 > > > > > > > > > From: jesusislord887 steppingstone3@ > > > > > To: Lyme_and_Rife > > > > > Sent: Wednesday, March 21, 2012 11:41 PM > > > > > Subject: OT: mold > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Dear Lyme and Rife yahoo group: > > > > > I am wondering if any of the MMS protocols will treat furniture > and/or clothing that has any kind of mold in it? I have tried treating > some unfinished solid maple wood furniture with 3% hydrogen peroxide > (the kind typically found in a drug store/pharmacy) and also with white > vinegar. All I did, though, was spray the furniture on all sides and let > it air out in a closed-off room (some of the time which had the ceiling > fan going). I did not wipe off the moisture; I only sprayed it and let > it air dry. I did it at first with a mask over my face. After the first > day of airing out, I went in to spray some of the sides that I could not > get on the furniture. However, I did not put the mask over my face. I > had a reaction. So, I know I should use a mask always. After a couple of > days in-full of airing out after treatment, the smell did seem less > intense. But, one of the drawers > > > > > still seemed to smell that musty smell. I therefore did not want to > put my recently washed clothing back into the drawers. > > > > > Does anyone know if the MMS1 sprayed on untreated wood that has > any kind of mold on it will clear up the mold in it in full? Also, how > should one treat any clothing that was in the moldy drawers (i.e., > putting the MMS1 in the wash load)? Finally, how does one know if the > mold has been fully resolved in the furniture and clothing or not? If > one does have to discard the items, how should one properly dispose of > it and not harm anyone else nor the environment? > > > > > A reply would be appreciated. > > > > > Thank > > > > > you. > > > > > > In Christ Jesus the > > > > > Lord, > > > > > > > > > > > > > > Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.