Re: Help please my coil does not work anymore

[Guest guest]

Terry ,

Thank you so very much . I touched the circuit braker that looked loozed. Now it work again .

Thank you Terry I really appreciate.

Kindly Marie

To: Lyme_and_Rife Sent: Sunday, March 4, 2012 3:43 PMSubject: Re: Help please my coil does not work anymore

Marie,

To my knowledge won’t be back until late March or April. Check all of your connections in the back of the amp and there is also a circuit breaker on the back of the amp. Reading your post I didn’t see anything that should have caused a problem. If you are still having difficulty after checking connections etc. perhaps a phone call would be better.

Terry

From: Marie Benoit

Sent: Sunday, March 04, 2012 3:08 PM

To: lyme_and_rife

Subject: Help please my coil does not work anymore

HI everyone ,

My coil machine quite on me . it was working fine and now ti srtop at 6 instead of the 13 desired even thouhgt a minute before it was doing fine .

I did 2 mistakes .

when I changed the frequency, fater having I decreased correctly the ``ampl ``button on the generator frequency , but I forgot to decrease the gain 1 and gain 2 on the amplifier .I guess it was due to recent stress I had with my husband health who almost passed away 3 days ago. Do you know if is back .

Thank you for your help .

Kindly Marie

[Guest guest]

Hi Marie,

You might try checking the switch calculator and make sure that you didn't

accidently hit the wrongal switch. That alone will cause the ampl to not get up

to where it is supposed to be. I would in fact check that first. Also try

another frequency and change the switches to match that frequency to see if it

will work. Does your amplifier light turn green when you turn up the knobs all

of the way or does it stay yellow or does the light even light up? I actually

blew out a fuse which is inside of the amplifier on mine once. Unfortunately,

you must remove the back of the amplifier to get to the fuse. I had to go to a

specialty electronics store to find the correct fuse and once I replaced the

fuse it started working again. One other thing you might try is to turn the

unit off and unplug everything and replug everything in just to make sure that

you didn't accidentally pull out one of the plugs. Also make sure your coil is

as far away from the amp as possible before turning up your ampl knob. These

are the only suggestions that I can make to you. You might email one of the

other coil builders to see if they have any suggestions on trouble shooting.

>

> HI everyone ,

>  

> My coil machine quite on me . it was working fine and now ti srtop at 6

instead of the 13 desired even thouhgt a minute before it was doing fine .

> I did 2 mistakes .

> when I changed the frequency, fater having I decreased correctly the ``ampl

``button on the generator frequency , but I forgot to decrease the gain 1 and

gain 2 on the amplifier  .I guess it was due to recent stress I had with my

husband health who almost passed away 3 days ago. Do you know if is back .

> Thank you for your help .

> Kindly Marie

>