Jump to content
RemedySpot.com

OT: PLEASE HELP my coil does not work anymore !

Rate this topic


Guest guest

Recommended Posts

Guest guest

Hi Everyone ,

I had an unusual abrupt sore jump last time on the AC ammeter from 13 to full .

I reduced it as soon as I saw it then I let it cool down and It would not go further than 3 anymore . I then touched the circuit braker on the back let it cool again and it did goes agian to 13 . Thought I had finished my cession so I did not use it .

yesterday I wanted to make our cession again and it would not go above 3 on the AC ammeter of the rife . I shut it down tuched again the circuit braker on th eback veryfyed all the letters it was ok . let it cool agian and start it again but no . it is stucked at 3 it will not go further . The red light on the left gain of the amplifyer has always been red since i got the machine .

Any insight is welcome thank you very much ,

Kindly Marie

Link to comment
Share on other sites

Guest guest

Marie,

The Amp should never be used with red Lights on. Have you checked the connections on the back of the amp? Do you have photos that show you how to connect?. If the circuit breaker was still hot it may not reset. Can we speak be phone?

Terry

From: Marie Benoit

Sent: Wednesday, March 28, 2012 1:50 PM

To: lyme_and_rife

Subject: OT: PLEASE HELP my coil does not work anymore !

Hi Everyone ,

I had an unusual abrupt sore jump last time on the AC ammeter from 13 to full .

I reduced it as soon as I saw it then I let it cool down and It would not go further than 3 anymore . I then touched the circuit braker on the back let it cool again and it did goes agian to 13 . Thought I had finished my cession so I did not use it .

yesterday I wanted to make our cession again and it would not go above 3 on the AC ammeter of the rife . I shut it down tuched again the circuit braker on th eback veryfyed all the letters it was ok . let it cool agian and start it again but no . it is stucked at 3 it will not go further . The red light on the left gain of the amplifyer has always been red since i got the machine .

Any insight is welcome thank you very much ,

Kindly Marie

Link to comment
Share on other sites

Guest guest

Thank you very much Terry for answering ,

yes I think the best would be to call

the connection are ok on the back i did nto touche them for 2 years . The circui tbrakers could no tb ehot as it had sit there for 2 weeks .

May I call you please ?

Thank you so very much Terry,

Kindly Marie

To: Lyme_and_Rife Sent: Wednesday, March 28, 2012 5:26 PMSubject: Re: OT: PLEASE HELP my coil does not work anymore !

Marie,

The Amp should never be used with red Lights on. Have you checked the connections on the back of the amp? Do you have photos that show you how to connect?. If the circuit breaker was still hot it may not reset. Can we speak be phone?

Terry

From: Marie Benoit

Sent: Wednesday, March 28, 2012 1:50 PM

To: lyme_and_rife

Subject: OT: PLEASE HELP my coil does not work anymore !

Hi Everyone ,

I had an unusual abrupt sore jump last time on the AC ammeter from 13 to full .

I reduced it as soon as I saw it then I let it cool down and It would not go further than 3 anymore . I then touched the circuit braker on the back let it cool again and it did goes agian to 13 . Thought I had finished my cession so I did not use it .

yesterday I wanted to make our cession again and it would not go above 3 on the AC ammeter of the rife . I shut it down tuched again the circuit braker on th eback veryfyed all the letters it was ok . let it cool agian and start it again but no . it is stucked at 3 it will not go further . The red light on the left gain of the amplifyer has always been red since i got the machine .

Any insight is welcome thank you very much ,

Kindly Marie

Link to comment
Share on other sites

Guest guest

Marie

Terry

From: Marie Benoit

Sent: Wednesday, March 28, 2012 5:33 PM

To: Lyme_and_Rife

Subject: Re: OT: PLEASE HELP my coil does not work anymore !

Thank you very much Terry for answering ,

yes I think the best would be to call

the connection are ok on the back i did nto touche them for 2 years . The circui tbrakers could no tb ehot as it had sit there for 2 weeks .

May I call you please ?

Thank you so very much Terry,

Kindly Marie

To: Lyme_and_Rife Sent: Wednesday, March 28, 2012 5:26 PMSubject: Re: OT: PLEASE HELP my coil does not work anymore !

Marie,

The Amp should never be used with red Lights on. Have you checked the connections on the back of the amp? Do you have photos that show you how to connect?. If the circuit breaker was still hot it may not reset. Can we speak be phone?

Terry

From: Marie Benoit

Sent: Wednesday, March 28, 2012 1:50 PM

To: lyme_and_rife

Subject: OT: PLEASE HELP my coil does not work anymore !

Hi Everyone ,

I had an unusual abrupt sore jump last time on the AC ammeter from 13 to full .

I reduced it as soon as I saw it then I let it cool down and It would not go further than 3 anymore . I then touched the circuit braker on the back let it cool again and it did goes agian to 13 . Thought I had finished my cession so I did not use it .

yesterday I wanted to make our cession again and it would not go above 3 on the AC ammeter of the rife . I shut it down tuched again the circuit braker on th eback veryfyed all the letters it was ok . let it cool agian and start it again but no . it is stucked at 3 it will not go further . The red light on the left gain of the amplifyer has always been red since i got the machine .

Any insight is welcome thank you very much ,

Kindly Marie

Link to comment
Share on other sites

Guest guest

Hi Marie,

I wonder if you blew out a fuse in the left channel of the amplifier. If you

have the 1850HD amp the fuse is inside of the amp at least on mine it was, when

I blew out a fuse. we had to take the top off of the amp to get to the fuse.

Also if you have a multimeter that is a separate component of the switch box,

check to see if you need a new battery. A change of battery on my multimeter

fixed my problem.

>

> Marie,

>

> The Amp should never be used with red Lights on. Have you checked the

connections on the back of the amp? Do you have photos that show you how to

connect?. If the circuit breaker was still hot it may not reset. Can we speak be

phone?

>

> Terry

>

> From: Marie Benoit

> Sent: Wednesday, March 28, 2012 1:50 PM

> To: lyme_and_rife

> Subject: OT: PLEASE HELP my coil does not work anymore !

>

>

>

> Hi Everyone ,

>

> I had an unusual abrupt sore jump last time on the AC ammeter from 13 to full

..

> I reduced it as soon as I saw it then I let it cool down and It would not go

further than 3 anymore . I then touched the circuit braker on the back let it

cool again and it did goes agian to 13 . Thought I had finished my cession so I

did not use it .

> yesterday I wanted to make our cession again and it would not go above 3 on

the AC ammeter of the rife . I shut it down tuched again the circuit braker on

th eback veryfyed all the letters it was ok . let it cool agian and start it

again but no . it is stucked at 3 it will not go further . The red light on the

left gain of the amplifyer has always been red since i got the machine .

> Any insight is welcome thank you very much ,

> Kindly Marie

>

Link to comment
Share on other sites

Guest guest

THank you very much for the idea Suzan ,

I will also call Terry tomorow with the screw driver in the hand

Kindly marie

To: Lyme_and_Rife Sent: Wednesday, March 28, 2012 8:07 PMSubject: Re: OT: PLEASE HELP my coil does not work anymore !

Hi Marie,I wonder if you blew out a fuse in the left channel of the amplifier. If you have the 1850HD amp the fuse is inside of the amp at least on mine it was, when I blew out a fuse. we had to take the top off of the amp to get to the fuse. Also if you have a multimeter that is a separate component of the switch box, check to see if you need a new battery. A change of battery on my multimeter fixed my problem.>> Marie,> > The Amp should never be used with red Lights on. Have you checked the connections on the back of the amp? Do you have photos that show you how to connect?. If the circuit breaker was still hot it may not reset. Can we speak be phone?> > Terry> >

From: Marie Benoit > Sent: Wednesday, March 28, 2012 1:50 PM> To: lyme_and_rife > Subject: OT: PLEASE HELP my coil does not work anymore !> > > > Hi Everyone ,> > I had an unusual abrupt sore jump last time on the AC ammeter from 13 to full .> I reduced it as soon as I saw it then I let it cool down and It would not go further than 3 anymore . I then touched the circuit braker on the back let it cool again and it did goes agian to 13 . Thought I had finished my cession so I did not use it . > yesterday I wanted to make our cession again and it would not go above 3 on the AC ammeter of the rife . I shut it down tuched again the circuit braker on th eback veryfyed all the letters it was ok . let it cool agian and start it

again but no . it is stucked at 3 it will not go further . The red light on the left gain of the amplifyer has always been red since i got the machine .> Any insight is welcome thank you very much ,> Kindly Marie>

Link to comment
Share on other sites

Guest guest

THank you so very much Adam ,

Terry helped me and it works now .

Kindly Marie

To: Lyme_and_Rife Sent: Thursday, March 29, 2012 4:22 PMSubject: Re: OT: PLEASE HELP my coil does not work anymore !

Hi Marie,Which manufacturer's Coil Machine is it?Then owners of the same manufacturer may be of better assistance, I would think.Adam>> Hi Everyone ,> > I had an unusual abrupt sore jump last time on the AC ammeter from 13 to full .> I reduced it as soon as I saw it then I let it cool down and It would not go further than 3 anymore . I then touched the circuit braker on the back let it cool again and it did goes agian to 13 . Thought I had finished my cession so I did not use it . > yesterday I wanted to make our cession again and it would not go above 3 on the AC ammeter of the rife . I shut it down tuched again the circuit braker on th

eback veryfyed all the letters it was ok . let it cool agian and start it again but no . it is stucked at 3 it will not go further . The red light on the left gain of the amplifyer has always been red since i got the machine .> Any insight is welcome thank you very much ,> Kindly Marie >

Link to comment
Share on other sites

Guest guest

Hi ,

Several doctors we've seen over the years have told us there is no way to get the uranium out. We thought this was true because years of heat and FIR sauna didn't budge the high numbers. However, since starting bi-monthly detox foot baths (we use AMD Ion Cleanse-Solo) around New Years, it's been pouring out, in fact so much and so fast it made one of us really sick on about the 5th ion cleanse (4.5 days in bed with a severe hx). If

you have high uranium (or high anything), you might want to go slow and

for shorter times than they suggest until you know you you respond.

Larry H

Link to comment
Share on other sites

Guest guest

Hi ,The previous post about detoxing uranium is from a friend of mine who has Lyme and does muscle testing to determine the level of detoxification after doing the ION cleanse. I am not sure how accurate that is to determine the amount of detoxification. Larry H

Link to comment
Share on other sites

Guest guest

Wha tis this remedy for uranimum Suzan please I missed it

Thanks marie

To: Lyme_and_Rife Sent: Tuesday, April 3, 2012 2:47 PMSubject: Re: OT: PLEASE HELP my coil does not work anymore !

Hi Larry,Have you seen significant improvement in the uranium levels on your metals tests? That would be the true indicator. I don't always trust people's muscle testing as it is easy for ones own intention to get in the way. Since Uranium is stored in the bones, I have heard from my MD that it is impossible to eradicate, and I am sure after years of reading heavy metals tests of thousands of patients she would know, but if you have the metals test to prove it, I am happy to know that the remedyfor high uranium is so simple.>> Hi ,> > > The previous post about detoxing uranium is from a friend of mine who has Lyme and does muscle testing to determine the level of

detoxification after doing the ION cleanse. I am not sure how accurate that is to determine the amount of detoxification. > > > Larry H>

Link to comment
Share on other sites

Guest guest

what is that foot bath please ? we had the nucelar could of chernobyl in France a few years ago

THanks

Kindly marie

To: Lyme_and_Rife Sent: Tuesday, April 3, 2012 2:43 PMSubject: Re: OT: PLEASE HELP my coil does not work anymore !

Hi Larry,Thanks that is good to know. I have two foot baths and one came with my rife machine which actually runs detox frequencies into the tub simultaneous to pulling toxins out. I will have to check and see if there are frequencies for heavy metal poisoning that I can try in my footbath. I also think that the Cowden laser detox protocol in combination with a footbath would be very helpful. Dr. Klinghardt uses laser detox while doing a footbath.>> Hi ,> > > Several > doctors we've seen over the years have told us there is no way to get > the uranium out. We thought this was true because years of heat and FIR > sauna didn't budge the

high numbers. However, since starting bi-monthly > detox foot baths (we use AMD Ion Cleanse-Solo) around New Years, it's > been pouring out, in fact so much and so fast it made one of us really > sick on about the 5th ion cleanse (4.5 days in bed with a severe hx). If you have high uranium (or high anything), you might want to go slow and for shorter times than they suggest until you know you you respond. > > > Larry H>

Link to comment
Share on other sites

Guest guest

According to my heavy metals test there is none. Uranium lives in the bones,

not the soft tissues and organs like mercury and lead do. Jim posted a link

that puports remedies for Uranium, but I have my doubts that any of it will

work, based on the information that was included in my test.

> >

> > Hi ,

> >

> >

> > The previous post about detoxing uranium is from a friend of mine who has

Lyme and does muscle testing to determine the level of detoxification after

doing the ION cleanse. I am not sure how accurate that is to determine the

amount of detoxification.

> >

> >

> > Larry H

> >

>

Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...