Re: Need suggestions on how to proceed with GB-4000 treatment

[Guest guest]

Hi Sparkle Goose,

The instructions that came with the GB-4000 show where the dial should be for

each % of full power, or call you dealer. I suggest you don't guess.

General practice of the Forum members is go conservative; from my own

experience, I do not allow such a strong herx. Only a mild one. Implies lower

wattages and shorter time periods to start. Also, I continue at one setting with

mild herxes until no herxes, then I up the watts and / or duration. I wait

several days until feel good before another treatment.

With one frequency, you are getting full power as set. Be careful.

Adam

>

> Well, I finally tried my friend's GB-4000 and I really liked it!!!

> QUESTION: How do you achieve precision wattage on the GB-4000? I wanted to

use 2 watts, but the number " 2 " never showed up when we turned the wattage knob

(the knob on the left side). In fact, no numbers showed up - it is guesswork

isn't it - or was I doing it wrong?

>

> I used the GB-4000 at frequency 432 and about 5 watts (turned dial from left

to a pointing-straight-up position) for 60 seconds. Needless to say, after that

I felt the onset of weakness with also some nausea and lightheadedness. In the

evening, I had a kind of a surge in energy but then had a troubled night

awakening repeatedly with periodic breathing issues, a decline in O2 sats,

twitching, mild heart issues, cramping, occasional head pain, fatigue, a feeling

of currents running up my limbs, and burning of the soles of my feet. Would you

call that a minor herx?

>

> Today I'm OK - just feeling weaker. No telling what symptoms might still

surface tomorrow or the next day or night. I'm actually glad that I was still on

antibiotics when I tried the GB-4000 - that way I didn't have as bad as herx as

I would have had without them.

>

> QUESTION: Since I did have a type of herx after my first use of the GB-4000

at frequency 432 and 5 watts, should I just keep the dials set at 432 and a

wattage of 5 for the next few sessions? In other words, is it best to wait

until you no longer herx at a given wattage before increasing it or is it best

to just move up the wattage even though you herxed at the previous lower

setting? A friend suggested moving the wattage up to the maximum of 10 next

time. That makes me nerous.

>

> I'm really pleased with my GB-4000 experience.

>