Guest guest Posted April 28, 2012 Report Share Posted April 28, 2012 Hello,I bought an EMEM 5 used from another member of the group a few months ago. For the first couple of months it definitely worked. I had Herx reactions and I was getting better. Lately, I get no reaction at all and my symptoms are returning.Is it possible my machine is broken?Observations:- Inside the phanotron tube, the two electrodes glow, but there's no glowing plasma in between the electrodes (like I see in pictures of other machines) It never glowed between the electrodes.Mine does NOT look like this: http://billsplasmatubes.com/8inptub.jpg - The machine only draws 10 watts from the wall socket. It was like this from the beginning, too.Maybe it's been underpowered since I got it? How do I troubleshoot this thing? How much power are they supposed to draw? Quote Link to comment Share on other sites More sharing options...
Guest guest Posted April 28, 2012 Report Share Posted April 28, 2012 Mark, I recently purchased an EMEM-5D brand new & mine doesn't glow in-between the electrodes either. I never noticed this before because to tell you the truth, I didn't know it was supposed to glow. I'll have to check it out further. Susie > > Hello, > > I bought an EMEM 5 used from another member of the group a few months > ago. For the first couple of months it definitely worked. I had Herx > reactions and I was getting better. Lately, I get no reaction at all > and my symptoms are returning. > > Is it possible my machine is broken? > > Observations: > > - Inside the phanotron tube, the two electrodes glow, but there's no > glowing plasma in between the electrodes (like I see in pictures of > other machines) It never glowed between the electrodes. > > Mine does NOT look like this: http://billsplasmatubes.com/8inptub.jpg > <http://billsplasmatubes.com/8inptub.jpg> > > - The machine only draws 10 watts from the wall socket. It was like > this from the beginning, too. > > Maybe it's been underpowered since I got it? How do I troubleshoot this > thing? How much power are they supposed to draw? > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted May 2, 2012 Report Share Posted May 2, 2012 Hi mstockmyer, It is not uncommon for any rife device to have killed off the pathogen load at the frequency (frx) and session time that was used... You simply may not be killing off enough pathogens at this point. To compensate for this, try scaling up on your session time by 5 extra minutes each session going forward. With an EMEM device, you need to get as close to the machine as possible. If after 3 or more sessions this is not producing a herx, then selecting another frx would be next.. Take care, Jim > > Hello, > > I bought an EMEM 5 used from another member of the group a few months > ago. For the first couple of months it definitely worked. I had Herx > reactions and I was getting better. Lately, I get no reaction at all > and my symptoms are returning. > > Is it possible my machine is broken? > > Observations: > > - Inside the phanotron tube, the two electrodes glow, but there's no > glowing plasma in between the electrodes (like I see in pictures of > other machines) It never glowed between the electrodes. > > Mine does NOT look like this: http://billsplasmatubes.com/8inptub.jpg > <http://billsplasmatubes.com/8inptub.jpg> > > - The machine only draws 10 watts from the wall socket. It was like > this from the beginning, too. > > Maybe it's been underpowered since I got it? How do I troubleshoot this > thing? How much power are they supposed to draw? > Quote Link to comment Share on other sites More sharing options...
Guest guest Posted May 7, 2012 Report Share Posted May 7, 2012 Do you know who made your device? I would send it back to the manufacturer and see if they can fix it. If it is one of Dan 's machines, I would see if he would look at it and diagnose whether or not it is working. These bulbs can wear out and it might be that you need a new bulb. It could also be that you need to try a different frequency for your particular ailment. I used an EMEM for a few years and got to a place where I was no longer herxing. When I bought the coil, I started herxing again. I now run 432 on the coil and rarely have a herx anymore accept in the fall and spring. It could be that you have to wait for a flare up and see if you herx. I sure am herxing doing homeopathics though, so I am thinking that my immune system is really kicking in and fighting stuff that the coil may not be reaching. > > Hello, > > I bought an EMEM 5 used from another member of the group a few months > ago. For the first couple of months it definitely worked. I had Herx > reactions and I was getting better. Lately, I get no reaction at all > and my symptoms are returning. > > Is it possible my machine is broken? > > Observations: > > - Inside the phanotron tube, the two electrodes glow, but there's no > glowing plasma in between the electrodes (like I see in pictures of > other machines) It never glowed between the electrodes. > > Mine does NOT look like this: http://billsplasmatubes.com/8inptub.jpg > <http://billsplasmatubes.com/8inptub.jpg> > > - The machine only draws 10 watts from the wall socket. It was like > this from the beginning, too. > > Maybe it's been underpowered since I got it? How do I troubleshoot this > thing? How much power are they supposed to draw? > Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.