Re: Description & Review of Zappers?

[Guest guest]

I, too, am very curious about these questions.  It seems that my heart

irregularities are somewhat worse when zapping and I wonder if the electrical

current is part of the cause.  I have PVCs and have been reluctant to begin

zapping again because they seem to get worse.  I just posted about this, but

wonder if any scientist type out there can answer these and my question about

heart electrical ouput.

 

Aurther, if you're reading this could you comment on the super zappicator and if

this is an issue.

 

Thanks,  Edy

From: zanaglen@... <zanaglen@...>

Subject: Description & Review of Zappers?

Dr

Date: Friday, December 26, 2008, 5:30 PM

Hello folks.

Would you be so kind as to help me with a few zapper questions?

(1) How many volts and amps does a typical zapper output?

(2) Are there specific frequencies that a typical zapper outputs?

(3) Or do they usually operate without an outputted frequency?

(4) Is the current that goes back and forth between the electrodes or hand

cylinders (via the person holding the zapper) usually AC or DC?

(5) What are a couple trustworthy retailers of low-priced but quality

zappers?

Thanks so much.

peace and healing,

Glen from Illinois

P.S. Also, is there a web page or Zapper roundup review which answers any

of these questions? Thanks again.

************ **One site keeps you connected to all your email: AOL Mail,

Gmail, and Mail. Try it now.

(http://www.aol. com/?optin= new-dp & icid= aolcom40vanity & ncid=emlcntaolco

m00000025)

[Guest guest]

I am no expert, just keep that in mind when I try to respond here...

I think the latest " standard " that Dr. recommends is 12 volts,

but at least 9 volts, I personally think more is better to a certain

extent. My frequency generator outputs about 11 volts and ~165

milliamps with no load/resistance. I have a super zapper deluxe 2004

and it outputs about 13.5-14 volts at maximum and about 50 milliamps,

with no load. The super zapper deluxe 2004 outputs about 34Khz

frequency. I can set my frequency generator to any frequency I want

from 0-10 Mhz. The current is pulsed DC, positive offset. I don't

currently know what to recommend. I was at Dr.'s clinic in 2007

and this is what she was recommending patients buy...

http://www.healthysigns.com/products/order.htm, but that doesn't mean

that others don't work as well either, I think the super zapper deluxe

ones work fine in my opinion. Before buying, make sure you ask about

what it's like using it, I recall that the ones ppl had at the clinic

seemed to beep alot, and I'm not sure if you can turn off that

feature, idk what I'm talking about basically, it's just something I

observed when seeing others use their zappers. My fav is my frequency

generator, as it makes no noise (and I don't like noise), and I get 11

volts out of it, and I check it with a multimeter to make sure it's

positive offset, but it costed me $450 and obviously is not portable,

and I unplug it at night for EMF safety reasons since it's right next

to my bed. Hope this helps.

>

> Hello folks.

>

> Would you be so kind as to help me with a few zapper questions?

>

> (1) How many volts and amps does a typical zapper output?

>

> (2) Are there specific frequencies that a typical zapper outputs?

>

> (3) Or do they usually operate without an outputted frequency?

>

> (4) Is the current that goes back and forth between the electrodes

or hand

> cylinders (via the person holding the zapper) usually AC or DC?

>

> (5) What are a couple trustworthy retailers of low-priced but quality

> zappers?

>

> Thanks so much.

>

> peace and healing,

> Glen from Illinois

[Guest guest]

Dear Glen (and all the other nice folks on this list),

I am Arthur Doerksen, owner of www.BestZapper.com As the designer and

manufacturer of the very first automatic Hulda zapper, I think I can

helpfully address these questions. And as a professional electronic design

engineer I have a fair understanding of the technical side as well as principles

of application.

Here are my answers:

1. One page 15 of her book, The Cure for All Diseases, Dr. summarizes the

specifications for a zapper. She says it must have a DC output of 5 to 10 V. We

can now calculate the maximum current output from the output resistance of the

generating circuit. She uses a 1000 ohm resistor to limit the output current.to

safe and effective levels. With a maximum output of 5 to 10 V, this resistance

gives us a maximum possible output current of 5 to 10 milliamps. In practice,

the actual DC current delivered to the body is considerably lower than this,

because of the extra resistance at the surface of the skin and in the body

itself.

2. Again from page 15 of The Cure for All Diseases, Dr. e specifies a

frequency range of 10 Hz to 500,000 Hz for a zapper. The example circuit she

gives operates at 30,000 Hz. Because of a physical phenomenon called the skin

effect, I chose to give our Auto-Zap professional zapper an operating frequency

of 2500 Hz. This lower frequency current will penetrate considerably deeper in

the body, better energizing the blood flow in the deep large arteries and veins.

It also works very well for powering zappicators, which are simple magnetic

antennas which allow zapping substances like foods, which do not have an immune

system.

3. Any DC pulse generator needs an output frequency, or else it becomes a

simple DC power source, like a battery. I think what you're asking is, " do I

need to select a particular frequency for a particular problem that I wish to

address in my body? " Dr. 's answer to that is simple: the zapper wakes up

your own white blood cells, and they are well able to identify and destroy

parasites, bacteria, viruses and fungi of all kinds using their inborn wisdom.

No tuning is needed.

Many people get the idea of tuning zapper frequencies for particular parasites

from the tables of frequencies in the back of her book, The Cure for All

Diseases. This table of frequencies was developed before she had discovered the

zapper, and was required for destroying parasites and pathogens using tuned

frequencies with an AC signal, NOT the DC pulses of a zapper. As she points out

on pages 13 and 14 of The Cure for All Diseases, using these frequencies

required two stages. First, the pathogen had to be identified by Syncrometer

testing, and second, it had to be destroyed by applying the selected frequency

for three minutes using an AC generator. This procedure could take many hours,

and the results were often temporary and frustrating. The zapper is a much

simpler, better way. I have asked Dr. personally about the " zappers "

which use frequency keys or tuning devices, and she told me that she does not

use or recommend them.

4. A Dr. zapper must have only positive DC pulses between its output

leads. She writes that even a tiny negative pulse can help sustain the life of

a parasite. This consideration excludes all Bob Beck " blood purification " type

devices, and many Rife devices as well.

5. Best zapper.com has been making and selling fully automatic, high quality

Hulda zappers longer than anybody else in the world. We are the only ones

that offer a full three month 100% moneyback guarantee if you're not delighted,

and the only ones who will answer your questions on the telephone. Why not

check us out? You are bound to learn something from the new videos at our site.

God bless you!

Arthur

888-533-7007

1-604-826-1406

www.BestZapper.com

www.ForgetPills.com

www.BestWithoutDrugs.com

P.S. Are you as healthy as you would like?

Description & Review of Zappers?

Hello folks.

Would you be so kind as to help me with a few zapper questions?

(1) How many volts and amps does a typical zapper output?

(2) Are there specific frequencies that a typical zapper outputs?

(3) Or do they usually operate without an outputted frequency?

(4) Is the current that goes back and forth between the electrodes or hand

cylinders (via the person holding the zapper) usually AC or DC?

(5) What are a couple trustworthy retailers of low-priced but quality

zappers?

Thanks so much.

peace and healing,

Glen from Illinois

P.S. Also, is there a web page or Zapper roundup review which answers any

of these questions? Thanks again.

**************One site keeps you connected to all your email: AOL Mail,

Gmail, and Mail. Try it now.

(http://www.aol.com/?optin=new-dp & icid=aolcom40vanity & ncid=emlcntaolcom00000025)

[Guest guest]

Dear Arthur,

I'm hoping you can answer a quick question. I was recently diagnosed

with ALS and am following the advice of a Natural Healer to get me

well again. He has strongly recommended using a zapper, which I plan

on doing.

I'm wondering how uncomfortable these devices are for the user? I

have had several nerve conduction tests leading up to my diagnosis,

and HATED them. If the feeling while using a zapper is anything like

the EMG, I'm not sure I'll be able to deal with it.

Any help you can provide is greatly appreciated.

- Jeff

>

> Dear Glen (and all the other nice folks on this list),

>

> I am Arthur Doerksen, owner of www.BestZapper.com As the designer

and manufacturer of the very first automatic Hulda zapper, I

think I can helpfully address these questions. And as a professional

electronic design engineer I have a fair understanding of the

technical side as well as principles of application.

>

> Here are my answers:

>

> 1. One page 15 of her book, The Cure for All Diseases, Dr.

summarizes the specifications for a zapper. She says it must have a

DC output of 5 to 10 V. We can now calculate the maximum current

output from the output resistance of the generating circuit. She

uses a 1000 ohm resistor to limit the output current.to safe and

effective levels. With a maximum output of 5 to 10 V, this

resistance gives us a maximum possible output current of 5 to 10

milliamps. In practice, the actual DC current delivered to the body

is considerably lower than this, because of the extra resistance at

the surface of the skin and in the body itself.

>

> 2. Again from page 15 of The Cure for All Diseases, Dr. e

specifies a frequency range of 10 Hz to 500,000 Hz for a zapper. The

example circuit she gives operates at 30,000 Hz. Because of a

physical phenomenon called the skin effect, I chose to give our Auto-

Zap professional zapper an operating frequency of 2500 Hz. This lower

frequency current will penetrate considerably deeper in the body,

better energizing the blood flow in the deep large arteries and

veins. It also works very well for powering zappicators, which are

simple magnetic antennas which allow zapping substances like foods,

which do not have an immune system.

>

> 3. Any DC pulse generator needs an output frequency, or else it

becomes a simple DC power source, like a battery. I think what

you're asking is, " do I need to select a particular frequency for a

particular problem that I wish to address in my body? " Dr. 's

answer to that is simple: the zapper wakes up your own white blood

cells, and they are well able to identify and destroy parasites,

bacteria, viruses and fungi of all kinds using their inborn wisdom.

No tuning is needed.

>

> Many people get the idea of tuning zapper frequencies for

particular parasites from the tables of frequencies in the back of

her book, The Cure for All Diseases. This table of frequencies was

developed before she had discovered the zapper, and was required for

destroying parasites and pathogens using tuned frequencies with an AC

signal, NOT the DC pulses of a zapper. As she points out on pages 13

and 14 of The Cure for All Diseases, using these frequencies required

two stages. First, the pathogen had to be identified by Syncrometer

testing, and second, it had to be destroyed by applying the selected

frequency for three minutes using an AC generator. This procedure

could take many hours, and the results were often temporary and

frustrating. The zapper is a much simpler, better way. I have asked

Dr. personally about the " zappers " which use frequency keys or

tuning devices, and she told me that she does not use or recommend

them.

>

> 4. A Dr. zapper must have only positive DC pulses between

its output leads. She writes that even a tiny negative pulse can

help sustain the life of a parasite. This consideration excludes all

Bob Beck " blood purification " type devices, and many Rife devices as

well.

>

> 5. Best zapper.com has been making and selling fully automatic,

high quality Hulda zappers longer than anybody else in the

world. We are the only ones that offer a full three month 100%

moneyback guarantee if you're not delighted, and the only ones who

will answer your questions on the telephone. Why not check us out?

You are bound to learn something from the new videos at our site.

>

> God bless you!

>

> Arthur

> 888-533-7007

> 1-604-826-1406

>

> www.BestZapper.com

> www.ForgetPills.com

> www.BestWithoutDrugs.com

>

> P.S. Are you as healthy as you would like?

>

>

>

>

> Description & Review of Zappers?

>

>

>

> Hello folks.

>

> Would you be so kind as to help me with a few zapper questions?

>

> (1) How many volts and amps does a typical zapper output?

>

> (2) Are there specific frequencies that a typical zapper outputs?

>

> (3) Or do they usually operate without an outputted frequency?

>

> (4) Is the current that goes back and forth between the

electrodes or hand

> cylinders (via the person holding the zapper) usually AC or DC?

>

> (5) What are a couple trustworthy retailers of low-priced but

quality

> zappers?

>

> Thanks so much.

>

> peace and healing,

> Glen from Illinois

>

>

> P.S. Also, is there a web page or Zapper roundup review which

answers any

> of these questions? Thanks again.

> **************One site keeps you connected to all your email: AOL

Mail,

> Gmail, and Mail. Try it now.

> (http://www.aol.com/?optin=new-

dp & icid=aolcom40vanity & ncid=emlcntaolcom00000025)

>

>

[Guest guest]

Dear Jeff,

I use a zapper daily and I sometimes can detect a faint tingle but

usually nothing at all. Mostly what you feel is better after using

one!!!! I have Arthur's auto-zap and it works very well for me!!

Good luck.

I wish you the best in your quest for good health. :-)

-lucky

>

> Dear Arthur,

>

> I'm hoping you can answer a quick question. I was recently

diagnosed

> with ALS and am following the advice of a Natural Healer to get me

> well again. He has strongly recommended using a zapper, which I

plan

> on doing.

>

> I'm wondering how uncomfortable these devices are for the user? I

> have had several nerve conduction tests leading up to my diagnosis,

> and HATED them. If the feeling while using a zapper is anything

like

> the EMG, I'm not sure I'll be able to deal with it.

> Any help you can provide is greatly appreciated.

>

> - Jeff

>

[Guest guest]

Dear Edy,

Thanks for your reply! I can now buy a zapper knowing it will not be

a form of self-torture. Thanks also for the info. on ozone therapy. I

will look into it further and ask my natural healer what he thinks

about it. I can't thank you enough for your reply.

- Jeff

> >

> > Dear Glen (and all the other nice folks on this list),

> >

> > I am Arthur Doerksen, owner of www.BestZapper. com As the

designer

> and manufacturer of the very first automatic Hulda zapper, I

> think I can helpfully address these questions. And as a

professional

> electronic design engineer I have a fair understanding of the

> technical side as well as principles of application.

> >

> > Here are my answers:

> >

> > 1. One page 15 of her book, The Cure for All Diseases, Dr.

> summarizes the specifications for a zapper. She says it must have a

> DC output of 5 to 10 V. We can now calculate the maximum current

> output from the output resistance of the generating circuit. She

> uses a 1000 ohm resistor to limit the output current.to safe and

> effective levels. With a maximum output of 5 to 10 V, this

> resistance gives us a maximum possible output current of 5 to 10

> milliamps. In practice, the actual DC current delivered to the body

> is considerably lower than this, because of the extra resistance at

> the surface of the skin and in the body itself.

> >

> > 2. Again from page 15 of The Cure for All Diseases, Dr. e

> specifies a frequency range of 10 Hz to 500,000 Hz for a zapper.

The

> example circuit she gives operates at 30,000 Hz. Because of a

> physical phenomenon called the skin effect, I chose to give our

Auto-

> Zap professional zapper an operating frequency of 2500 Hz. This

lower

> frequency current will penetrate considerably deeper in the body,

> better energizing the blood flow in the deep large arteries and

> veins. It also works very well for powering zappicators, which are

> simple magnetic antennas which allow zapping substances like foods,

> which do not have an immune system.

> >

> > 3. Any DC pulse generator needs an output frequency, or else it

> becomes a simple DC power source, like a battery. I think what

> you're asking is, " do I need to select a particular frequency for a

> particular problem that I wish to address in my body? " Dr. 's

> answer to that is simple: the zapper wakes up your own white blood

> cells, and they are well able to identify and destroy parasites,

> bacteria, viruses and fungi of all kinds using their inborn wisdom.

> No tuning is needed.

> >

> > Many people get the idea of tuning zapper frequencies for

> particular parasites from the tables of frequencies in the back of

> her book, The Cure for All Diseases. This table of frequencies was

> developed before she had discovered the zapper, and was required

for

> destroying parasites and pathogens using tuned frequencies with an

AC

> signal, NOT the DC pulses of a zapper. As she points out on pages

13

> and 14 of The Cure for All Diseases, using these frequencies

required

> two stages. First, the pathogen had to be identified by Syncrometer

> testing, and second, it had to be destroyed by applying the

selected

> frequency for three minutes using an AC generator. This procedure

> could take many hours, and the results were often temporary and

> frustrating. The zapper is a much simpler, better way. I have asked

> Dr. personally about the " zappers " which use frequency keys

or

> tuning devices, and she told me that she does not use or recommend

> them.

> >

> > 4. A Dr. zapper must have only positive DC pulses between

> its output leads. She writes that even a tiny negative pulse can

> help sustain the life of a parasite. This consideration excludes

all

> Bob Beck " blood purification " type devices, and many Rife devices

as

> well.

> >

> > 5. Best zapper.com has been making and selling fully automatic,

> high quality Hulda zappers longer than anybody else in the

> world. We are the only ones that offer a full three month 100%

> moneyback guarantee if you're not delighted, and the only ones who

> will answer your questions on the telephone. Why not check us out?

> You are bound to learn something from the new videos at our site.

> >

> > God bless you!

> >

> > Arthur

> > 888-533-7007

> > 1-604-826-1406

> >

> > www.BestZapper. com

> > www.ForgetPills. com

> > www.BestWithoutDrug s.com

> >

> > P.S. Are you as healthy as you would like?

> >

> >

> >

> >

> > Description & Review of Zappers?

> >

> >

> >

> > Hello folks.

> >

> > Would you be so kind as to help me with a few zapper questions?

> >

> > (1) How many volts and amps does a typical zapper output?

> >

> > (2) Are there specific frequencies that a typical zapper outputs?

> >

> > (3) Or do they usually operate without an outputted frequency?

> >

> > (4) Is the current that goes back and forth between the

> electrodes or hand

> > cylinders (via the person holding the zapper) usually AC or DC?

> >

> > (5) What are a couple trustworthy retailers of low-priced but

> quality

> > zappers?

> >

> > Thanks so much.

> >

> > peace and healing,

> > Glen from Illinois

> >

> >

> > P.S. Also, is there a web page or Zapper roundup review which

> answers any

> > of these questions? Thanks again.

> > ************ **One site keeps you connected to all your email:

AOL

> Mail,

> > Gmail, and Mail. Try it now.

> > (http://www.aol. com/?optin= new-

> dp & icid=aolcom40van ity & ncid= emlcntaolcom0000 0025)

> >

> >