Guest guest Posted February 15, 2011 Report Share Posted February 15, 2011 Hi all, I finally have been able to download my lab results. My testosterone level in July was 424 NG/ML, with a reference range of 214-827. So, I guess this means I am somewhat on the low side. And this was taken just two hours after application of Androgel. I would hat to imagine what it is 22 hours afteer application. Upon further searching, I found that in 5/2007 the level was only 297, and as I remember, this was 12 hours after application. So, at the tail end, I am way below the lowest reference point. I am xxy, and there is none of my own. What are your thoughts? Quote Link to comment Share on other sites More sharing options...
Guest guest Posted February 15, 2011 Report Share Posted February 15, 2011 Hi, I produce no T due to bilateral orchiectomy. I have found that between 0.3cc and 0.4cc (200mg/cc) of depotestosterone injected into heavy muscle every 7 days maintains me at between 400 and 600 total T with E2 levels around 30 to 40. This is a fairly good range for me and by taking shots weekly the levels do not fluctuate outside the 400 to 600 range. Any more DepoTestesterone and the E2 levels go quite high. I do not want to take Arimidex to control E2. From: A lan <mills47460@...> Subject: T levels Date: Tuesday, February 15, 2011, 7:56 PM  Hi all, I finally have been able to download my lab results. My testosterone level in July was 424 NG/ML, with a reference range of 214-827. So, I guess this means I am somewhat on the low side. And this was taken just two hours after application of Androgel. I would hat to imagine what it is 22 hours afteer application. Upon further searching, I found that in 5/2007 the level was only 297, and as I remember, this was 12 hours after application. So, at the tail end, I am way below the lowest reference point. I am xxy, and there is none of my own. What are your thoughts? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.