Jump to content
RemedySpot.com

Re: hair test results - high arsenic & low Ca/Cu/Zn

Rate this topic


Guest guest

Recommended Posts

Guest guest

Does the hair test meet the counting rules for deranged mineral transport? Where

is the mercury level?

My child had high arsenic and antimony, too. He did meet the counting rules, so

I assumed mercury was high, though he wasn't excreting it in his hair.

We did not have lead issues. Is the lead above or below the reference range

number?

We used ALA only for chelation. In about 2.5 years, my child's arsenic and

antimony were well below the reference ranges and he no longer showed deranged

mineral transport AND his diagnosis was removed, as he healed.

We also changed many lifestyle elements to decrease exposures, such as organic

foods, avoiding pesticides/herbicides, switching to flame retardant free

mattress, bedding, sleepwear, etc.

The low elements on the hair test may (or may not) mean anything - depends on

the whole picture. Look in the files section to see if the counting rules are

listed.

>

> just got hair elements from DDI,

>

> arsenic is about 94th percentile, and the only other toxic element is antimony

~70th (just into the yellow). lead is about 66th percentile, but still in green.

I want to chelate, but right now my son is only pooping every 3rd day. What

would be the best approach? I read that DMPS or DMSA with ALA is most effective

for arsenic? Should I be worried about lead/antimony at this level or just

focus on the arsenic? Does anyone have any success/recoverys stories chelating

arsenic?

>

> I was also very surprised to see extremely low values of a few elements..

> Strontium 2th %

> Calcium - 3th %

> Copper - 7th %

> Zinc - 10th %

>

> can the high arsenic cause malabsorption of these specific elements?

>

> my 3 yr old son is hf asd and has gut issues (yeast/bacteria) and constipation

and some sensory issues, but is verbal with quirky speech and slight social

delay. not really any blatant arsenic toxicity symptoms, except maybe some

fatigue. no vaccinations. we think the source of arsenic is industrial, since

we live down the street from the highest measured level of arsenic in the air in

the state of oregon.

>

> thanks for any advice

>

Link to comment
Share on other sites

Guest guest

HI .

Do you think I could order a mattress without the flame retardant. I heard they

are like 3000 dollars

From: mosaictm <lisa369@...>

Subject: [ ] Re: hair test results - high arsenic & low Ca/Cu/Zn

Received: Wednesday, March 16, 2011, 12:57 PM

 

Does the hair test meet the counting rules for deranged mineral transport?

Where is the mercury level?

My child had high arsenic and antimony, too. He did meet the counting rules, so

I assumed mercury was high, though he wasn't excreting it in his hair.

We did not have lead issues. Is the lead above or below the reference range

number?

We used ALA only for chelation. In about 2.5 years, my child's arsenic and

antimony were well below the reference ranges and he no longer showed deranged

mineral transport AND his diagnosis was removed, as he healed.

We also changed many lifestyle elements to decrease exposures, such as organic

foods, avoiding pesticides/herbicides, switching to flame retardant free

mattress, bedding, sleepwear, etc.

The low elements on the hair test may (or may not) mean anything - depends on

the whole picture. Look in the files section to see if the counting rules are

listed.

>

> just got hair elements from DDI,

>

> arsenic is about 94th percentile, and the only other toxic element is antimony

~70th (just into the yellow). lead is about 66th percentile, but still in green.

I want to chelate, but right now my son is only pooping every 3rd day. What

would be the best approach? I read that DMPS or DMSA with ALA is most effective

for arsenic? Should I be worried about lead/antimony at this level or just

focus on the arsenic? Does anyone have any success/recoverys stories chelating

arsenic?

>

> I was also very surprised to see extremely low values of a few elements..

> Strontium 2th %

> Calcium - 3th %

> Copper - 7th %

> Zinc - 10th %

>

> can the high arsenic cause malabsorption of these specific elements?

>

> my 3 yr old son is hf asd and has gut issues (yeast/bacteria) and constipation

and some sensory issues, but is verbal with quirky speech and slight social

delay. not really any blatant arsenic toxicity symptoms, except maybe some

fatigue. no vaccinations. we think the source of arsenic is industrial, since

we live down the street from the highest measured level of arsenic in the air in

the state of oregon.

>

> thanks for any advice

>

Link to comment
Share on other sites

Guest guest

I once threw one of the non retardant foam mattresses on a fire. It quickly

caught fire and for the next two minutes you could get no where near the thing.

No matter what they cost, you don't want one of the things.

Thanks,

Dan

http://danweatherington.com/willie.htm

[ ] Re: hair test results - high arsenic & low Ca/Cu/Zn

Received: Wednesday, March 16, 2011, 12:57 PM

Does the hair test meet the counting rules for deranged mineral transport?

Where is the mercury level?

My child had high arsenic and antimony, too. He did meet the counting rules,

so I assumed mercury was high, though he wasn't excreting it in his hair.

We did not have lead issues. Is the lead above or below the reference range

number?

We used ALA only for chelation. In about 2.5 years, my child's arsenic and

antimony were well below the reference ranges and he no longer showed deranged

mineral transport AND his diagnosis was removed, as he healed.

We also changed many lifestyle elements to decrease exposures, such as organic

foods, avoiding pesticides/herbicides, switching to flame retardant free

mattress, bedding, sleepwear, etc.

The low elements on the hair test may (or may not) mean anything - depends on

the whole picture. Look in the files section to see if the counting rules are

listed.

>

> just got hair elements from DDI,

>

> arsenic is about 94th percentile, and the only other toxic element is

antimony ~70th (just into the yellow). lead is about 66th percentile, but still

in green. I want to chelate, but right now my son is only pooping every 3rd day.

What would be the best approach? I read that DMPS or DMSA with ALA is most

effective for arsenic? Should I be worried about lead/antimony at this level or

just focus on the arsenic? Does anyone have any success/recoverys stories

chelating arsenic?

>

> I was also very surprised to see extremely low values of a few elements..

> Strontium 2th %

> Calcium - 3th %

> Copper - 7th %

> Zinc - 10th %

>

> can the high arsenic cause malabsorption of these specific elements?

>

> my 3 yr old son is hf asd and has gut issues (yeast/bacteria) and

constipation and some sensory issues, but is verbal with quirky speech and

slight social delay. not really any blatant arsenic toxicity symptoms, except

maybe some fatigue. no vaccinations. we think the source of arsenic is

industrial, since we live down the street from the highest measured level of

arsenic in the air in the state of oregon.

>

> thanks for any advice

>

Link to comment
Share on other sites

Guest guest

Dan, there are people who want them, regardless of the cost and with full

knowledge of the fire risks.  The horrible chemicals that are used on

conventional mattresses have not been used for all of eternity, meaning we can

make do without them, and they can be quite damaging to one's health. 

 

There are precautions people can take to lower the fire risks; such as, not

throwing it on a flaming pile, not smoking in bed, not keeping a heater in bed,

removing electrical appliances from the area (heating pads, laptops,

radios, etc)  and having appropriate fire detection equipment in place and

working.  I'm sure there are others but these are just a few of the things we

have done. 

 

It may not be the right solution for you, but it is the right step for others. 

(We currently have one chemical free mattress out of five beds in the house,

because that child really needed a chemical free bed and is doing much much

better). 

Amy

 

From: mosaictm <lisa369@...>

Subject: [ ] Re: hair test results - high arsenic & low Ca/Cu/Zn

Received: Wednesday, March 16, 2011, 12:57 PM

Does the hair test meet the counting rules for deranged mineral transport? Where

is the mercury level?

My child had high arsenic and antimony, too. He did meet the counting rules, so

I assumed mercury was high, though he wasn't excreting it in his hair.

We did not have lead issues. Is the lead above or below the reference range

number?

We used ALA only for chelation. In about 2.5 years, my child's arsenic and

antimony were well below the reference ranges and he no longer showed deranged

mineral transport AND his diagnosis was removed, as he healed.

We also changed many lifestyle elements to decrease exposures, such as organic

foods, avoiding pesticides/herbicides, switching to flame retardant free

mattress, bedding, sleepwear, etc.

The low elements on the hair test may (or may not) mean anything - depends on

the whole picture. Look in the files section to see if the counting rules are

listed.

>

> just got hair elements from DDI,

>

> arsenic is about 94th percentile, and the only other toxic element is antimony

~70th (just into the yellow). lead is about 66th percentile, but still in green.

I want to chelate, but right now my son is only pooping every 3rd day. What

would be the best approach? I read that DMPS or DMSA with ALA is most effective

for arsenic? Should I be worried about lead/antimony at this level or just focus

on the arsenic? Does anyone have any success/recoverys stories chelating

arsenic?

>

> I was also very surprised to see extremely low values of a few elements..

> Strontium 2th %

> Calcium - 3th %

> Copper - 7th %

> Zinc - 10th %

>

> can the high arsenic cause malabsorption of these specific elements?

>

> my 3 yr old son is hf asd and has gut issues (yeast/bacteria) and constipation

and some sensory issues, but is verbal with quirky speech and slight social

delay. not really any blatant arsenic toxicity symptoms, except maybe some

fatigue. no vaccinations. we think the source of arsenic is industrial, since we

live down the street from the highest measured level of arsenic in the air in

the state of oregon.

>

> thanks for any advice

>

Link to comment
Share on other sites

Guest guest

Sandy,

You need a script to get one.  Once you have the script its good for life so

keep it in a safe place.

 

Some are that expensive others are not.  you just need to research it. 

 

I got a boulder style mattress from whitelotus.net

(http://www.whitelotus.net/organic-cotton-mattress-no-flame-retardant/)

 

we love it - their twin size are around $900 and used to include shipping -

check on that as I don't know if it still does or not.  they also have a

stowaway/roll up size for travel or sleepovers.

 

Amy

 

From: mosaictm <lisa369@...>

Subject: [ ] Re: hair test results - high arsenic & low Ca/Cu/Zn

Received: Wednesday, March 16, 2011, 12:57 PM

 

Does the hair test meet the counting rules for deranged mineral transport? Where

is the mercury level?

My child had high arsenic and antimony, too. He did meet the counting rules, so

I assumed mercury was high, though he wasn't excreting it in his hair.

We did not have lead issues. Is the lead above or below the reference range

number?

We used ALA only for chelation. In about 2.5 years, my child's arsenic and

antimony were well below the reference ranges and he no longer showed deranged

mineral transport AND his diagnosis was removed, as he healed.

We also changed many lifestyle elements to decrease exposures, such as organic

foods, avoiding pesticides/herbicides, switching to flame retardant free

mattress, bedding, sleepwear, etc.

The low elements on the hair test may (or may not) mean anything - depends on

the whole picture. Look in the files section to see if the counting rules are

listed.

>

> just got hair elements from DDI,

>

> arsenic is about 94th percentile, and the only other toxic element is antimony

~70th (just into the yellow). lead is about 66th percentile, but still in green.

I want to chelate, but right now my son is only pooping every 3rd day. What

would be the best approach? I read that DMPS or DMSA with ALA is most effective

for arsenic? Should I be worried about lead/antimony at this level or just focus

on the arsenic? Does anyone have any success/recoverys stories chelating

arsenic?

>

> I was also very surprised to see extremely low values of a few elements..

> Strontium 2th %

> Calcium - 3th %

> Copper - 7th %

> Zinc - 10th %

>

> can the high arsenic cause malabsorption of these specific elements?

>

> my 3 yr old son is hf asd and has gut issues (yeast/bacteria) and constipation

and some sensory issues, but is verbal with quirky speech and slight social

delay. not really any blatant arsenic toxicity symptoms, except maybe some

fatigue. no vaccinations. we think the source of arsenic is industrial, since we

live down the street from the highest measured level of arsenic in the air in

the state of oregon.

>

> thanks for any advice

>

Link to comment
Share on other sites

Guest guest

hI i LIVE IN cANAda

From: mosaictm <lisa369@...>

Subject: [ ] Re: hair test results - high arsenic & low Ca/Cu/Zn

Received: Wednesday, March 16, 2011, 12:57 PM

 

Does the hair test meet the counting rules for deranged mineral transport? Where

is the mercury level?

My child had high arsenic and antimony, too. He did meet the counting rules, so

I assumed mercury was high, though he wasn't excreting it in his hair.

We did not have lead issues. Is the lead above or below the reference range

number?

We used ALA only for chelation. In about 2.5 years, my child's arsenic and

antimony were well below the reference ranges and he no longer showed deranged

mineral transport AND his diagnosis was removed, as he healed.

We also changed many lifestyle elements to decrease exposures, such as organic

foods, avoiding pesticides/herbicides, switching to flame retardant free

mattress, bedding, sleepwear, etc.

The low elements on the hair test may (or may not) mean anything - depends on

the whole picture. Look in the files section to see if the counting rules are

listed.

>

> just got hair elements from DDI,

>

> arsenic is about 94th percentile, and the only other toxic element is antimony

~70th (just into the yellow). lead is about 66th percentile, but still in green.

I want to chelate, but right now my son is only pooping every 3rd day. What

would be the best approach? I read that DMPS or DMSA with ALA is most effective

for arsenic? Should I be worried about lead/antimony at this level or just focus

on the arsenic? Does anyone have any success/recoverys stories chelating

arsenic?

>

> I was also very surprised to see extremely low values of a few elements..

> Strontium 2th %

> Calcium - 3th %

> Copper - 7th %

> Zinc - 10th %

>

> can the high arsenic cause malabsorption of these specific elements?

>

> my 3 yr old son is hf asd and has gut issues (yeast/bacteria) and constipation

and some sensory issues, but is verbal with quirky speech and slight social

delay. not really any blatant arsenic toxicity symptoms, except maybe some

fatigue. no vaccinations. we think the source of arsenic is industrial, since we

live down the street from the highest measured level of arsenic in the air in

the state of oregon.

>

> thanks for any advice

>

Link to comment
Share on other sites

Guest guest

Can you  please share the gains you saw with the mattress . what were the

changes you saw.

Does it make that much of a difference?

thanks

From: mosaictm <lisa369@...>

Subject: [ ] Re: hair test results - high arsenic & low Ca/Cu/Zn

Received: Wednesday, March 16, 2011, 12:57 PM

 

Does the hair test meet the counting rules for deranged mineral transport? Where

is the mercury level?

My child had high arsenic and antimony, too. He did meet the counting rules, so

I assumed mercury was high, though he wasn't excreting it in his hair.

We did not have lead issues. Is the lead above or below the reference range

number?

We used ALA only for chelation. In about 2.5 years, my child's arsenic and

antimony were well below the reference ranges and he no longer showed deranged

mineral transport AND his diagnosis was removed, as he healed.

We also changed many lifestyle elements to decrease exposures, such as organic

foods, avoiding pesticides/herbicides, switching to flame retardant free

mattress, bedding, sleepwear, etc.

The low elements on the hair test may (or may not) mean anything - depends on

the whole picture. Look in the files section to see if the counting rules are

listed.

>

> just got hair elements from DDI,

>

> arsenic is about 94th percentile, and the only other toxic element is antimony

~70th (just into the yellow). lead is about 66th percentile, but still in green.

I want to chelate, but right now my son is only pooping every 3rd day. What

would be the best approach? I read that DMPS or DMSA with ALA is most effective

for arsenic? Should I be worried about lead/antimony at this level or just focus

on the arsenic? Does anyone have any success/recoverys stories chelating

arsenic?

>

> I was also very surprised to see extremely low values of a few elements..

> Strontium 2th %

> Calcium - 3th %

> Copper - 7th %

> Zinc - 10th %

>

> can the high arsenic cause malabsorption of these specific elements?

>

> my 3 yr old son is hf asd and has gut issues (yeast/bacteria) and constipation

and some sensory issues, but is verbal with quirky speech and slight social

delay. not really any blatant arsenic toxicity symptoms, except maybe some

fatigue. no vaccinations. we think the source of arsenic is industrial, since we

live down the street from the highest measured level of arsenic in the air in

the state of oregon.

>

> thanks for any advice

>

Link to comment
Share on other sites

Guest guest

the mercury level was around 40% percentile, presumably because he is

unvaccinated and we don't have amalgams. the counting rules were not met. the

lead is just within the reference range (inside green). i just ordered a rbc

elements test to verify the low minerals.

i am glad to hear of your success! why did you decide to chelate with ALA only?

> >

> > just got hair elements from DDI,

> >

> > arsenic is about 94th percentile, and the only other toxic element is

antimony ~70th (just into the yellow). lead is about 66th percentile, but still

in green. I want to chelate, but right now my son is only pooping every 3rd

day. What would be the best approach? I read that DMPS or DMSA with ALA is

most effective for arsenic? Should I be worried about lead/antimony at this

level or just focus on the arsenic? Does anyone have any success/recoverys

stories chelating arsenic?

> >

> > I was also very surprised to see extremely low values of a few elements..

> > Strontium 2th %

> > Calcium - 3th %

> > Copper - 7th %

> > Zinc - 10th %

> >

> > can the high arsenic cause malabsorption of these specific elements?

> >

> > my 3 yr old son is hf asd and has gut issues (yeast/bacteria) and

constipation and some sensory issues, but is verbal with quirky speech and

slight social delay. not really any blatant arsenic toxicity symptoms, except

maybe some fatigue. no vaccinations. we think the source of arsenic is

industrial, since we live down the street from the highest measured level of

arsenic in the air in the state of oregon.

> >

> > thanks for any advice

> >

>

Link to comment
Share on other sites

Guest guest

We purchased an organic full size mattress and box spring for my 11 months ago.

The cost was about $1300. His last hair test showed practically no antimony

(we've been chelating with ALA for 2 years), and his ASD dx was removed this

past fall. Worth EVERY penny.

>

> >

>

> > just got hair elements from DDI,

>

> >

>

> > arsenic is about 94th percentile, and the only other toxic element is

antimony ~70th (just into the yellow). lead is about 66th percentile, but still

in green. I want to chelate, but right now my son is only pooping every 3rd

day. What would be the best approach? I read that DMPS or DMSA with ALA is

most effective for arsenic? Should I be worried about lead/antimony at this

level or just focus on the arsenic? Does anyone have any success/recoverys

stories chelating arsenic?

>

> >

>

> > I was also very surprised to see extremely low values of a few elements..

>

> > Strontium 2th %

>

> > Calcium - 3th %

>

> > Copper - 7th %

>

> > Zinc - 10th %

>

> >

>

> > can the high arsenic cause malabsorption of these specific elements?

>

> >

>

> > my 3 yr old son is hf asd and has gut issues (yeast/bacteria) and

constipation and some sensory issues, but is verbal with quirky speech and

slight social delay. not really any blatant arsenic toxicity symptoms, except

maybe some fatigue. no vaccinations. we think the source of arsenic is

industrial, since we live down the street from the highest measured level of

arsenic in the air in the state of oregon.

>

> >

>

> > thanks for any advice

>

> >

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

Link to comment
Share on other sites

Guest guest

I used ALA only because my son had no need for DMSA that I could ascertain

(never had amalgams, hadn't had vaccines in the 2 years prior, lead levels were

not high). I also use (controversial, I know, but don't care) AK or muscle

testing and my son tested as a " no " for DMSA.

Regardless, it worked. BEAUTIFULLY.

> > >

> > > just got hair elements from DDI,

> > >

> > > arsenic is about 94th percentile, and the only other toxic element is

antimony ~70th (just into the yellow). lead is about 66th percentile, but still

in green. I want to chelate, but right now my son is only pooping every 3rd

day. What would be the best approach? I read that DMPS or DMSA with ALA is

most effective for arsenic? Should I be worried about lead/antimony at this

level or just focus on the arsenic? Does anyone have any success/recoverys

stories chelating arsenic?

> > >

> > > I was also very surprised to see extremely low values of a few elements..

> > > Strontium 2th %

> > > Calcium - 3th %

> > > Copper - 7th %

> > > Zinc - 10th %

> > >

> > > can the high arsenic cause malabsorption of these specific elements?

> > >

> > > my 3 yr old son is hf asd and has gut issues (yeast/bacteria) and

constipation and some sensory issues, but is verbal with quirky speech and

slight social delay. not really any blatant arsenic toxicity symptoms, except

maybe some fatigue. no vaccinations. we think the source of arsenic is

industrial, since we live down the street from the highest measured level of

arsenic in the air in the state of oregon.

> > >

> > > thanks for any advice

> > >

> >

>

Link to comment
Share on other sites

Join the conversation

You are posting as a guest. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...